search
0

£0.00

local_shippingFree delivery over £500
forumExpert help & advice
credit_cardInstant credit available
verified_userMoney back guarantee
;
.

Watco Anti Slip Traffic Paint

Textured, slip resistant coating for traffic areas. With UV resistance and low slip potential for pedestrians (Wet PTV 55), Watco’s Anti Slip Traffic Paint delivers improved safety by highlighting hazards and safe walking zones.

Watco Heavy Duty Anti Slip Traffic Paint is available for heavily trafficked areas, such as car parks and driveways. See Product Details for more information.



Qty
remove add


Close

Request a Sample


At Watco, we know choosing the right product for the job is of the upmost importance, therefore if you require a sample of any product simply fill in the below form and we will send one out to you. If you require help deciding which product best suits your project, you can speak with our technical experts directly Monday - Friday, 8:00 - 17:30 on 01483 418 418 or alternatively provide as much information as possible and we will contact you.


Message is Required
First Name required
Last Name required
Email Address required
Address 1 is required
City is required
Postcode is required
Country is required

The information that you provide will help us deliver relevant information to you regarding our products and services. Checking this box indicates that you have read and agreed to our terms of use and privacy policy. Please read these terms to understand how we protect and manage your data.

Close

Request a Quote


Our technical advisors are dedicated to providing accurate quotes. If you need a specific quote for your project, please fill in the form below, providing as much detail as you can in the 'Quote Details' box. <br> <br> Alternatively, you can speak with our technical experts directly Monday - Friday, 8:00 - 17:30 on 01483 418 418.


Message is Required
First Name required
Last Name required
Email Address required
Address 1 is required
City is required
Postcode is required
Country is required

The information that you provide will help us deliver relevant information to you regarding our products and services. Checking this box indicates that you have read and agreed to our terms of use and privacy policy. Please read these terms to understand how we protect and manage your data.

Fast Facts

Finish Original: coloured, matt, anti slip Heavy Duty: coloured, textured, low sheen.
Suitable For Asphalt, tarmac, concrete, brick, masonry and similar porous surfaces. The moisture content of concrete should be less than 75% RH.
Coverage 15-20m² depending on the texture of the substrate. The coverage rate does not allow for filling the crevices and texture of a tarmac or asphalt surface. Using the product in this way will greatly reduce coverage and extend drying time.

Accessories & Tools

Product Details remove

WATCO ANTI SLIP TRAFFIC PAINT

Watco Anti Slip Traffic Paint is a flexible, anti slip coating which transforms and brightens up asphalt, and offers a good degree of slip resistance with just one high build application.

Anti Slip Traffic Paint contains a pre-blended aggregate which provides a finely textured slip resistant surface. It leaves a more uniform and easily cleaned finish than conventional anti slip coatings where grit is sprinkled on separately.

This abrasion resistant, waterproof coating is most suited for use in light to medium trafficked areas, private asphalt driveways,tennis courts, playgrounds and warehouses. Watco Heavy Duty Anti Slip Traffic Paint is available for heavier wear external areas.

Anti Slip Traffic Paint is quick and easy to use for painting large areas, and ideal for highlighting hazards, marking out parking bays and pedestrian areas, and for using with Watco Stencils. This coating has excellent UV resistance which helps protect against fading. Anti Slip Traffic Paint carries CE Mark EN 1504-2 and has impressive test results for slip resistance, hardness, abrasion, adhesion, impact and flexibility. It’s virtually solvent free and has an A+ VOC emissions rating.

RECOMMENDED AREAS OF USE

  • Pedestrian walkways
  • Colour coding and highlighting hazardous areas
  • Line marking
  • Playgrounds
  • Tennis courts
  • Private asphalt driveways

FEATURES

  • Anti slip, flexible water based acrylic
  • Fine pre-blended grit offers slip resistance for pedestrians
  • Transforms, dull, drab asphalt and tarmac
  • Excellent resistance to UV and weathering
  • Colours, protects and waterproofs with just one coat
  • High pigment level offers excellent hiding power
  • Breathable
  • Virtually solvent free and odourless – safe to use inside as well as outside
  • Suitable for both asphalt and concrete
  • Superior performance demonstrated by ISO testing to CE Mark EN1504-2
Drying Time Recoat Time Touch Dry Light Traffic Medium Traffic
10°C 16 hours 8 hours 48 hours 72 hours
20°C 6 hours 4 hours 24 hours 48 hours
30°C 3 hours 2 hour 12 hours 24 hours
Light Traffic: Foot
Medium Traffic: Cars, trolley, pallet truck

WATCO HEAVY DUTY ANTI SLIP TRAFFIC PAINT

Watco Heavy Duty Anti Slip Traffic Paint is a tough, two pack, anti slip, solvent based epoxy resin coating for use in heavily trafficked areas, such as car parks, driveways and vehicle access areas.

The hard aluminium oxide grit offers a good level of slip and abrasion resistance with just one high build application. This versatile, exceptionally strong coating contains a solvent which bites into asphalt surfaces, and slightly penetrates concrete surfaces for the maximum possible adhesion without the need (generally) for a primer.

Heavy Duty Anti Slip Traffic Paint carries CE Mark EN 1504-2 and has impressive test results for slip resistance, hardness, abrasion, adhesion and impact resistance.

RECOMMENDED AREAS OF USE

  • Car parks
  • Driveways
  • Traffic routes and pedestrian walkways
  • Vehicle access areas
  • Colour coding and highlighting hazardous areas

FEATURES

  • Exceptionally strong, two pack, anti slip, solvent based epoxy resin
  • Pre-blended grit offers slip resistance for pedestrians and vehicle traffic
  • Transforms, dull, drab asphalt, tarmac and concrete in heavy wear areas
  • Colours and protects with just one coat
  • High pigment level offers excellent hiding power
  • Suitable for both asphalt and concrete
  • Excellent chemical resistance
  • Superior performance demonstrated by ISO testing to CE Mark EN1504-2
Drying Time Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance
10°C 12 hours 6 hours 16 hours 36 hours 7 days
20°C 6 hours 4 hours 8 hours 24 hours 7 days
30°C 6 hours 3 hour 8 hours 24 hours 7 days
Light Traffic: Foot
Medium Traffic: Cars, trolley, pallet truck

Products You May Be Interested In remove

Watco Stencils Details
Watco Trafficline 5L Details
Asphalt Crack Filler 5L Details
Watco Asphalt Paint 5L
grade
grade
grade
grade
(1)
Details

Specifications add

Composition Original: water based acrylic. Heavy Duty: two pack, solvent based epoxy resin.
Number of Components Original: 1, Heavy Duty: 2 (curing agent & resin).
Finish Original: coloured, matt, anti slip Heavy Duty: coloured, textured, low sheen.
Dry Film Thickness Original: 140 microns, Heavy Duty: 200 - 250 microns.
Wet Film Thickness Original: 200 microns, Heavy Duty: 250 - 300 microns.
Usage Interior / Exterior Original: interior & exterior, Heavy Duty: exterior.
Application Tools Medium pile roller. Cut in using a brush.
Min Application Temperature (°C) Air temperature 15°C, floor temperature 10°C.
Suitable For Asphalt, tarmac, concrete, brick, masonry and similar porous surfaces. The moisture content of concrete should be less than 75% RH.
Coverage 15-20m² depending on the texture of the substrate. The coverage rate does not allow for filling the crevices and texture of a tarmac or asphalt surface. Using the product in this way will greatly reduce coverage and extend drying time.
Pot Time (hours) Up to 30 minutes at 20°C.
Mix Ratio Heavy Duty: 24 parts curing agent: 100 parts resin.
Cleaning Tools Original: water, Heavy Duty: it is not practical to clean applicators and they should be discarded after use.
Shelf Life 12 months in unopened container.
Cleaning Mild, neutral detergent – Watco Protect is ideal.
Storage Between 15°C-25°C for at least 8 hours prior to use. Do not allow to freeze.
Principle Limitations Original: not recommended for use on concrete used by vehicles (see instead Watco Heavy Duty Anti Slip Traffic Paint). Watco Anti Slip Traffic Paint is intended as a decorative finish only, and will not bind or fill weak or defective asphalt surfaces. Do not apply in areas which will be constantly under water. Do not apply too thickly. If the crevices and texture of the asphalt are filled with paint, this can prevent water draining which may result in a slip hazard. Heavy Duty: Watco Heavy Duty Anti Slip Traffic Paint is intended as a decorative finish only, and will not bind or fill weak or defective asphalt surfaces. Do not apply too thickly - this coating contains an aggregate to provide slip resistance and if applied too thickly the aggregate could settle within the paint film and slip resistance will be reduced. Similarly, if the crevices and texture of the asphalt are filled with paint, this can prevent water draining which may result in a slip hazard. Although Heavy Duty Anti Slip Traffic Paint is resistant to degradation by UV rays, after intense or prolonged exposure to sunlight, some weathering may occur such as loss of gloss or slight fading – the strength and mechanical properties will not be affected. Do not apply to damp surfaces. Wood – If a small wooden section needs painting, providing it is sound, clean and dry and is not allowed to flex, this coating would be suitable. However, it should not be used on large wooden areas or decking. Unsuitable for Mastic Asphalt.

How to Apply add

SURFACE PREPARATION

New asphalt & tarmac – should be sound and at least 3 months old. If any residual oils remain, the surface should be washed using Watco Concroff.

Existing bare asphalt & tarmac – remove any grease or oil deposits using Watco Concroff. Painted surfaces – abrade to remove any weak or loose paint. Check remaining paint is well bonded. Very smooth, glossy paint should be lightly abraded to provide a key. Watco Bio D can be used to remove grease and oil from painted surfaces.

Bare concrete – remove surface laitance, dust and any light dirt or grease deposits using Watco Etch & Clean. Watco Etch & Clean also etches smooth, bare concrete surfaces to provide a key. Flush with clean water and allow surface to dry. For the removal of heavier deposits of oil and grease we recommend Watco Concroff, again, flush with clean water and allow the surface to dry.

New concrete – as a guide, new concrete should be left for four weeks to dry in the summer and six in the winter. The surface should then be prepared using Watco Etch & Clean and thoroughly rinsed away and left to dry prior to applying this coating.

Damp surfaces – this coating can be applied to residual damp which may remain after cleaning.

Metal - remove any dust and flaking material by disc grinding or wire brushing. Apply the coating immediately after preparation to the clean metal surface. Grease or oil can be removed using Watco Bio D. Allow the metal to dry before coating.

Galvanised Metal - Watco Galvaprime must be used to prepare galvanised metal. 

Non-ferrous Metals - for advice, please contact our technical department. 

Priming – Standard: one coat is generally sufficient. On very porous or open textured surfaces, two coats may be required. The first coat will act as a ‘priming coat’ and may be diluted with up to 10% water to assist with application.

Heavy duty - priming is not usually required, but for open textured, or highly porous high suction surfaces, such as sand and cement screed, use Watco 4 Hour Epoxy Primer to ensure a uniform finish and to prevent air entrapment bubbles.

MIXING (Heavy Duty)

Remove the two inner tins from the tall outer tin. Stir the contents of each tin thoroughly and pour all of the contents into the outer tin, (scrape around the inside of the tins to remove any residue). Mix the components together using a spatula or similar wide bladed tool, (a piece of wooden batten is ideal). Continue mixing until an even colour and consistency are obtained. Do not mix more than one pack at a time. If a paint stirrer fitted to an electric drill is used, also use the spatula to blend in any unmixed material from the side and bottom of the tin. The slip resistant particles are already pre-blended (in the Resin). Tip the mixed components into a shallow paint tray – do not leave in the outer tin. This coating is not intended to be thinned, however, in some situations up to 5% of Watco Solvent TH99 may be added to assist in application.

APPLICATION

Original: Stir the paint thoroughly and do not thin, however in very hot weather, (25°C+); up to 10% water may be added to make application easier. Apply by roller and work well into the surface. It can be applied by brush but this may result in reduced coverage. Avoid applying the paint too thickly as this encourages water to puddle on the surface and as such may become slippery. If a second coat is required, apply it as soon as the first coat is dry (generally 6 hours), and within 5 days of applying the first coat. If more than 5 days elapse, the first coat should be lightly abraded before the second coat is applied. Avoid washing the surface for 7 days.

Heavy Duty:  Best results are obtained in warm (minimum of 15°C), dry conditions with good ventilation. Apply one coat with a medium pile roller (not foam) working well into the surface of the asphalt or concrete. It can be applied by brush but this may result in reduced coverage. Do not exceed the maximum coverage of 20m2 per 5L pack. If a second coat is required, apply it as soon as the first coat is dry (generally 6 hours), and within 5 days of applying the first coat. If more than 5 days elapse, the first coat should be lightly abraded before the second coat is applied. Avoid washing the surface for 7 days.

SAFETY

Material Safety Data Sheets are available.

 

Accessories & Toolsadd

Associations, Awards & Standards


Legal Policy | Privacy Policy | Cookie Policy
© 2019 Watco Group, Registered in England - Number 459144. VAT number 310927818