Your browser version is not officially supported, and you may experience a degraded service. Please upgrade your browser.
Download the Watco App and get 10% OFF your first order placed via the app. Learn more

Grab a bargain in our clearance, with 65% off selected paint and repair. Shop now.

Watco Safety Coat Coarse

Heavy duty epoxy resin non slip coating

  • Coarse version for high hazard areas
  • Reinforced with diamond hard wax and ceramics
  • Fast curing - apply two coats in one day
  • Extremely low slip potential (WP 59)
Bulk discounts save up to 20%
Quantity Price per item Discount
1+ £156.30 -
6+ £140.70 Save 10%
20+ £125.00 Save 20%
Bulk discounts applied in basket

Frequently bought together

Total price

£223.70 (Ex VAT)

This item: Safety Coat Coarse BEF Hazard Yellow RAL 1021 £156.30 (Ex VAT)


Watco Safety Coat has been re-formulated to produce a ‘Best in Class’ water based, anti slip epoxy resin. 

This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save recoating costs. The rapid drying formula also allows the application of 2 coats in one day. Our unique blend of the best resins available with a ‘diamond hard’ wax and ceramic additive provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. 

All grades now carry CE Mark EN1504-2 and have impressive test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant, safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. 

All tests have been undertaken to ISO standard where applicable and demonstrated this ‘Best Ever Formulation’ to be 40% harder wearing than previously. 

Recommended areas of use

  • Warehouse
  • Production Areas
  • Workshops
  • Showrooms
  • Potentially slippery, heavy wear areas


  • Tough, hard wearing floor finish for heavy wear areas
  • Pre-blended aggregate provides an evenly textured finish
  • Apply to bare or previously painted surfaces
  • Easy roller, low odour application
  • Apply 2 coats in one day to reduce downtime
  • New colour formulations to RAL shades
  • Tested safe for use in food production areas
  • Superior performance demonstrated by ISO testing to CE mark EN1504-2
Curing TimesRecoat TimeTouch DryLight TrafficHeavy TrafficFull Chemical Resistance
10°C6-8 hours4 hours16 hours48 hours 7 days
20°C4-6 hours2 hours12 hours24 hours7 days
30°C4 hours1 hour12 hours24 hours7 days
Light Traffic: Foot, trolley, pallet truck, occasional forklift
Heavy Traffic: Regular forklift, heavy footfall, parked vehicles
Suitable for Concrete, wood, existing well bonded paint
Finish Mid gloss, medium texture
Interior or Exterior Interior
Primer required Not usually. Use Watco Powerfloat Primer on very smooth surfaces.
Composition 2 part reinforced water based epoxy resin
Number of components 1 x curing agent and 1 x resin.
Coverage 30m² per 5L per coat
Number of coats 2
Mix ratio 100 parts curing agent : 132 parts resin.
Dry film thickness 100 microns
Curing time 12 hours at 20°C
Minimum application temperature 15°C
Pot life Up to 2 hours at 20°C.
Shelf life 12 months in unopened containers.
Cleaning tools Warm soapy water.

Surface preparation

Can be applied to bare or previously painted surfaces providing the paint is well bonded. 

Bare Concrete – remove surface laitance, dust and any light dirt or grease deposits using Watco Etch & Clean. Watco Etch & Clean also etches smooth, bare concrete surfaces to provide a key. Remove Etch & Clean by thoroughly rinsing with clean water and allow surface to dry. If residual damp remains this is acceptable since Safety Coat is breathable. 

Powerfloated or very smooth surfaces – Watco Powerfloat Primer should be used on very smooth or power floated surfaces. 

New Concrete – new concrete should be left for four weeks to dry in the summer and six in the winter. The surface should then be prepared using Watco Etch & Clean and thoroughly rinsed away and left to dry prior to applying this coating. 

Painted surfaces – abrade to remove loose paint. Check remaining paint is well bonded. Very smooth, glossy paint should be lightly abraded to provide a key. Watco Bio D can be used to remove grease and oil from painted surfaces. Watco Concroff is a very powerful degreaser for contaminated bare concrete (Concroff can soften paint). 

Highly porous surfaces – a primer may be required for high suction surfaces such as sand and cement screed. Please contact us for advice. 


Remove the two inner tins from the tall outer tin. Stir the contents of each tin thoroughly and pour all of the contents into the outer tin (scrape around the inside of the tins to remove any residue). Mix the components together thoroughly using a spatula or similar wide bladed tool (a piece of wooden batten is ideal). Continue mixing until an even colour and consistency are obtained. Do not mix more than one pack at a time. If a paint stirrer fitted to an electric drill is used, also use the spatula to blend in any unmixed material from the sides and bottom of the tin. 


Best results are obtained in warm (minimum 15°C), dry conditions with good ventilation. In very high temperatures (30°C and above) it is recommended that bare concrete is lightly dampened first with water. Apply with a medium pile roller, working well into the surface of the concrete. Occasional stirring will ensure a more even distribution of the aggregate. Do not exceed the maximum coverage of 30m² per 5 litre pack, per coat. The product will darken slightly as curing commences and it should not be over rollered. The second coat can be applied as soon as the first coat is dry (generally 4-6 hours) and should be applied within 5 days. If more than 5 days elapse, the first coat should be lightly abraded before the second coat is applied. Avoid washing the surface for seven days.

Test results

Extensive testing is what makes us the most highly qualified paint and repair manufacturer on the market. Our tests cover just about everything you might want to know about a floor coating – how well it bonds to the floor, how durable it is, how well it stands up to scratching and much more.

Our key tests for Safety Coat:

  • Superior performance demonstrated by ISO testing to CE mark EN1504-2
  • Excellent slip resistance in wet conditions when tested to BS7976-2 - Safety Coat's PTV value is 55, a number above 36 indicates a low slip value
  • Wolff-Wilborn Hardness Test - Safety Coat is 9H (the hardest)
  • A+ VOC emissions rating with a low level of VOC (30g/Litre)
  • Gloss Value: 98 -  Measured on an Optical Glossmeter, +85% is High Gloss

Learn more about the tests we carry out and how to read the results here
Full test results can be found on the Technical Data Sheet

Ask a question

Be the first to ask a question...

Ask a question
0 questions / 0 answers

£156.30 (Ex VAT)

In stock

Useful information

Our Safety Coat Epoxy Floor Paint needs to be applied in two coats. It’s supplied as a tin of resin and a tin of curing agent. And when you mix the contents of the two tins together, it starts a reaction which causes the paint to cure.

If you’re painting an area of up to 45m², you’ll need four 5L tins (because, once mixed, a 5L tin won't keep for the second coat).

Here’s how we work it out:

  • Area to be painted: 45m² with two coats (we recommend two coats for the best result)
  • Tins needed: 4 x 5L
  • Why: Use 2 x 5L for the first coat; and the same again for the second

Our Coverage Calculator works this out for you – that way you know you’re buying exactly the paint you need and can use, without unnecessary waste.

Do you know the size of the area?
Bulk discounts save up to 20%
Quantity Price per item Discount
1+ £156.30 -
6+ £140.70 Save 10%
20+ £125.00 Save 20%
Bulk discounts applied in basket

Tools and accessories

Watco Painting Kit

Watco Painting Kit

Everything you need to help with floor painting

From £45.30  (Ex VAT)

12" Roller Frame & Handle

12" Roller Frame & Handle

A sturdy roller applying floor coatings

From £8.50  (Ex VAT)

Paint Brush

Paint Brush

Professional paint brushes suitable for all coatings

From £2.40  (Ex VAT)

Watco Paint Mixer

Watco Paint Mixer

A manual mixer for thorough mixing of two-part coatings

£3.40  (Ex VAT)

Watco Bio-D

Watco Bio-D

A heavy duty biodegradable cleaner for floor preparation

From £22.10  (Ex VAT)

Watco Etch & Clean

Watco Etch & Clean

Essential for preparing bare concrete ready for painting

£30.50  (Ex VAT)

Watco Mixing Stick

Watco Mixing Stick

Watco mixing stick for easily stirring paint prior to painting

£1.20  (Ex VAT)

What our customers say

Join our mailing list for the latest news...