Your browser version is not officially supported, and you may experience a degraded service. Please upgrade your browser.
Take advantage of the Christmas shutdown: 15% off and free delivery sitewide. Code: XMAS22
x

Watco Flowpatch Asphalt Repair

Heavy duty repairs for asphalt and tarmac

  • Tough, fibre reinforced repairs for heavy wear areas
  • Just add water, mix & pour
  • Can be applied to damp (not wet) asphalt & tarmac
  • Use at any depth from 5mm to 100mm in one layer
  • Sets at temperatures as low as 5°C
Delivery options
We are currently unable to offer our normal delivery service to Northern Ireland for this item. Please contact us for further details

Frequently bought together

Total price

£142.20 (Ex VAT)

This item: Watco Flowpatch Asphalt Repair £129.70 (Ex VAT)

Description

For decades we’ve been recommending our bestselling Flowpatch® pourable repair mortar for fast, pourable and strong repairs to concrete. Now, we’ve reformulated this winning formula so you can use it to repair asphalt and tarmac surfaces too.

The surface of asphalt and tarmac erodes over time, due to general wear and tear, causing the surface to become dished and damaged. Traditionally, repairs would involve cutting out around the damaged asphalt and refilling with a similar material. With Watco Flowpatch Asphalt Repair, just pour the mixture straight over the top of the surface erosion and used to fill holes up to 100mm deep in just one layer.

Recommended areas of use

  • Car parks
  • Loading areas
  • Drives
  • Paths
  • Internal asphalt floors

Features

  • Tough, fibre reinforced repairs for heavy wear areas
  • Just add water, mix & pour
  • Can be applied to damp (not wet) asphalt & Tarmac
  • Use at any depth from 5mm to 100mm in one layer
  • Sets at temperatures as low as 5°C
  • Accepts heavy traffic, including forklifts after just 2 hours
  • Resists oil and grease
  • Will not dust or deteriorate with freeze/thaw conditions
  • Mix as much as you need and reseal the pack for future use

Coverage: Approximately 0.5m2 at 25mm thick

Specification
Suitable for Asphalt, Tarmac and can also be used on concrete.
Interior or Exterior Interior and exterior.
Composition Fibre reinforced polymer, and cement based dark grey powder.
Number of components 1
Coverage Approximately 0.5m2 at 25mm thick.
Application tools Steel float or trowel. A mixing blade fitted into an electric drill helps with mixing.
Curing time 60 minutes for foot traffic. Full use for 2-3 hours. As a guide allow 24 hours when applied at 5°C.
Minimum application temperature 5°C.
Pot life Approximately 5-10 minutes at 20°C (longer at 15°C). Do not mix more than you can use within a few minutes.
Storage Store in dry, frost free conditions.
Shelf life 12 months in unopened container.
Cleaning tools Wash with water before the product dries.
Application

Surface Preparation

Asphalt or Tarmac should be at least 6 months old. New asphalt is too oily and mobile and could cause the product to crack.

Surfaces should be reasonably level so that the mixture can be poured into the repair.

Use a stiff brush to sweep out any loose material and contamination. Grease or oil should be scraped out or removed using a degreaser such as Watco Bio D. Repairs can be made to damp but not saturated surfaces.

 

Mixing

Remove the bag of powder from the plastic bucket and use the bucket, or any other suitable container, for mixing.
Due to the short working life of the mixed product, we recommend that you mix it close to the area to be repaired and only mix as much as you can use in 5-10 minutes. It is also useful to have a bucket of clean water to rinse the tools before the product dries.

The mix is 1 part water to 3 parts powder by volume. Use a measuring jug or beaker to put one or more measures of water into the mixing bucket. Add 3 measures of powder for every one measure of water. Add the powder gradually to the water, stirring continuously. Use a piece of batten or similar for small mixes, or a mixer fitted to an electric drill for larger quantities (Watco Flowtop Mixer is ideal).

The product is ready when an evenly coloured, smooth, pourable consistency is achieved. Use immediately and complete within 5-10 minutes.

 

Application

Pour onto the damaged asphalt. It can be applied from 5mm to 100mm in depth and “feather edged” around the repair (full strength is achieved at 5mm).

If filling holes deeper than 100mm build up in layers not exceeding 100mm thick, and allow 12 hours drying between each layer. If resurfacing larger damaged, worn patches of asphalt, aim to achieve a thickness of at least 3-5mm.

The product will flow and settle into the repair, a trowel may be required to help distribute it across the repair area. Clean tools in water when you have finished.

Data sheets

Safety data sheets

Safety Data Sheet

Technical data sheets

Technical Data Sheet
Ask a question

Be the first to ask a question...

Ask a question
0 questions / 0 answers

£129.70 (Ex VAT)

In stock

Delivery options
We are currently unable to offer our normal delivery service to Northern Ireland for this item. Please contact us for further details

Compare with similar products

Ratings Composition Durability Suitable for asphalt & concrete Deep fill version available How applied Cold setting version available
This product: Watco Flowpatch Asphalt Repair

£129.70

(Ex VAT)

Please make a product selection to continue

(1)
Fibre reinforced polymer, and cement based dark grey powder. Heavy Both Pour

Please make a product selection to continue

Watco Concrex Asphalt Repair

£209.00

(Ex VAT)

(1)
2 part epoxy resin plus aggregate Extreme Both Trowel
Watco Bitu-Mend® Pothole Repair

From

£58.90

(Ex VAT)

(9)
Single pack bitumen & aggregate blend Heavy Both Shovel and tamper N/A
Watco Bitu-Mend Advanced

£114.20

(Ex VAT)

(3)
2 part epoxy resin plus aggregate Extreme - - Trowel -
This product:

Watco Flowpatch Asphalt Repair

Watco Concrex Asphalt Repair

Watco Bitu-Mend® Pothole Repair

Watco Bitu-Mend Advanced

£129.70

(Ex VAT)

£209.00

(Ex VAT)

From

£58.90

(Ex VAT)

£114.20

(Ex VAT)

Please make a product selection to continue

View View View
Composition Fibre reinforced polymer, and cement based dark grey powder. 2 part epoxy resin plus aggregate Single pack bitumen & aggregate blend 2 part epoxy resin plus aggregate
Durability Heavy Extreme Heavy Extreme
Suitable for asphalt & concrete Both Both Both -
Deep fill version available -
How applied Pour Trowel Shovel and tamper Trowel
Cold setting version available N/A -

Please make a product selection to continue

View View View

Tools and accessories

Mixing Blade Flowtop/Flowpatch

Mixing Blade Flowtop/Flowpatch

For mechanical mixing of Watco Flowtop and Watco Flowpatch

£12.50  (Ex VAT)

10" Steel Float Flowtop/Flowpatch

10" Steel Float Flowtop/Flowpatch

Ideal for smoothing and levelling off repair materials

£7.60  (Ex VAT)

Wire Brush & Scraper

Wire Brush & Scraper

A useful tool for removing rust and old coatings

£2.70  (Ex VAT)

What our customers say

Join our mailing list for the latest news...