Ultra-strong repairs to damaged concrete and asphalt. Epoxy resin with Aggregate
Most asphalt repair materials remain slightly soft and are unsuitable for areas where heavy or narrow wheeled trolleys and forklifts are used. Concrex® Asphalt Repair Grade will withstand the heaviest use and is also ideal for repairing thin asphalt screeds and toppings.
| Properties | Strong and hard wearing |
| Suitable for | Asphalt, concrete |
| Interior or Exterior | Exterior, Interior |
| Primer required | No primer required |
| Composition | 2 part epoxy resin plus aggregate |
| Coverage | 1m² at 15mm thick per 25kg |
| Application tools | Steel float or trowel |
| Application | Tip mixed product into the void and work into gaps with a trowel |
| Curing time (at 20°C) | 12 hours |
| Minimum application temperature | 10°C |
| Pot life | Working life of mixed components: Approximately 30 minutes at 10°C - 20°C, less in higher temperatures |
| Storage | Between 10°C - 30°C. Do not allow to freeze |
| Shelf life | 12 months in unopened container |
| Principle limitations | Food products must be removed from the area during application and cure |
| Cleaning | When fully cured, proprietary detergents or degreasants may be used to clean the surface |
Ensure the void to be filled is clean, dry (slight damp is acceptable) and sound.
A primer is not required when the product is used to fill rough holes or cracks. We recommend Watco Tack Coat primer if using Watco Concrex Asphalt Repair over smooth substrates.
Mixing is easier on a board, but it can be done in the plastic container provided. Empty the contents of the smaller Curing Agent tin into the larger Resin tin and mix thoroughly using a palette knife or similar wide bladed tool. Immediately empty the mixed components onto the granite aggregate. Mix using a trowel to achieve a loose textured black compound. Ensure that the dry aggregate is thoroughly coated. The mixed product has a working life of appoximately 30 minutes at 10-20C°, less at higher temperatures.
Tip the mixed product into the void and work into any gaps and crevices with a trowel. Lightly tamp down with a piece of wood, compacting the product to remove air pockets. Finish with a trowel wiped with white spirit for a smooth finish.
|
|
|
|
|
|---|---|---|---|---|
|
This product:
Watco Concrex Asphalt Repair |
Watco Bitu-Mend® Pothole Repair |
Watco Flowpatch |
Watco Concrex® Carbon Fibre - Epoxy Repair Mortar |
|
|
£244.40 (Ex VAT) |
From £68.85 (Ex VAT) |
From £62.00 (Ex VAT) |
From £115.75 (Ex VAT) |
|
|
Please make a product selection to continue |
View | View | View | |
| Cold setting version available | - | N/A | ||
| Composition | 2 part epoxy resin plus aggregate | Single pack bitumen & aggregate blend | Reinforced cement & polymer powder | Two part epoxy resin |
| Durability | Extreme | Heavy | Heavy | Extreme |
| Suitable for asphalt & concrete | Concrete | Concrete | ||
| Deep fill version available | ||||
| How applied | Trowel | Shovel and tamper | Pour | Trowel |
|
Please make a product selection to continue |
View | View | View |
Our Deep Fill alternatives allow you to apply them at much thicker depths in one application. Meaning you can get a more economical formula that delivers the same strength and reduces downtime.
All hole repairIf you are repairing an area which is subject to heavy traffic, you'll need a product thats up to scratch. A repair made with Watco is one that's made to last.
All repair
