Bulk Discounts

Watco Bitu-Mend® Pour And Restore

For shallow surface repairs to damaged or cracked asphalt and tarmac

Use between 6-20mm deep
Self-smoothing epoxy formula
Slip resistant surface
Easy to mix and apply

Delivery options

Next day delivery slots available upon request. Call us on 01483 418418 for details.

Bulk discounts save up to 10%

Quantity	Price per item	Discount
1+	£119.50	-
6+	£107.55	Save 10%
Bulk discounts applied in basket

Watco Bitu-Mend® Pour & Restore is ideal for shallow repairs to damaged or cracked asphalt and tarmac. Just mix and pour over pitted, dished or worn surfaces and it self smoothes with just a little help from a trowel. The strength of epoxy resin combined with granite means that thin section repairs and resurfacing are tough enough for cars and lorries. The kit contains granite aggregate which is sprinkled over the repair to provide a slip resistant surface which blends in with the surrounding area.

Recommended areas of use

Repairing shallow depressions,
dished or pitted asphalt surfaces
Car parks, yards, pavements

Features

An alternative to digging out and replacing damaged asphalt
Tough epoxy resin based formula
Easy to mix and apply
Ideal for shallow repairs
Ready for traffic in 16 hours
Depth: 6.5-20mm. For deeper repairs see Watco Bitu-Mend®

Specification

Properties	Ideal for shallow repairs
Suitable for	Asphalt, concrete
Finish	Granular, black, slip resistant surface
Interior or Exterior	Exterior, Interior
Composition	2 part epoxy resin plus aggregate
Number of components	1 x resin and aggregate mix, 1 x curing agent, 1 x accelerator, finishing aggregate
Coverage	1m² at 10mm thick per 15kg
Application tools	Trowel
Application	Pour the mixed product onto the damaged asphalt and spread out using a trowel
Curing time (at 20°C)	16 hours
Pot life	Working life of mixed components: Approximately 15 minutes at 20°C, less in higher temperatures
Storage	Between 10°C - 30°C. Do not allow to freeze
Shelf life	24 months in unopened container
Depth	20mm

Application

Preparation

Ensure the hole is clean, dry (slight damp is acceptable) and clear from debris.

Mixing

Pour the tins of Curing Agent and Accelerator onto the Resin and aggregate mix in the outer bucket.

PLEASE NOTE: If you are repairing a number of small areas and need to extend the working life of the mixed product, or if the temperature is above 23°C do not use the Accelerator. Use a wide bladed tool to ensure thorough mixing.

Application

Pour the mixed product onto the damaged asphalt and spread out using a trowel. The product will self-smooth to a level finish. Before the Bitu-Mend Pour & Restore cures, sprinkle the finishing aggregate over the repair.

Data sheets