search
0

£0.00

local_shippingFree delivery over £500
forumExpert help & advice
credit_cardInstant credit available
verified_userMoney back guarantee
;
.

Watco Tack Coat

Epoxy resin adhesive primer for stronger repairs. New formula, designed for use with Concrex® in shallow, fiddly, or vertical repairs, it can be applied to damp or dry surfaces at temperatures about 0°C.

Watco Tack Coat Sub Zero is available for applications in cold conditions. See Product Details for more information.



Qty
remove add


Close

Request a Sample


At Watco, we know choosing the right product for the job is of the upmost importance, therefore if you require a sample of any product simply fill in the below form and we will send one out to you. If you require help deciding which product best suits your project, you can speak with our technical experts directly Monday - Friday, 8:00 - 17:30 on 01483 418 418 or alternatively provide as much information as possible and we will contact you.


Message is Required
First Name required
Last Name required
Email Address required
Address 1 is required
City is required
Postcode is required
Country is required

The information that you provide will help us deliver relevant information to you regarding our products and services. Checking this box indicates that you have read and agreed to our terms of use and privacy policy. Please read these terms to understand how we protect and manage your data.

Close

Request a Quote


Our technical advisors are dedicated to providing accurate quotes. If you need a specific quote for your project, please fill in the form below, providing as much detail as you can in the 'Quote Details' box. <br> <br> Alternatively, you can speak with our technical experts directly Monday - Friday, 8:00 - 17:30 on 01483 418 418.


Message is Required
First Name required
Last Name required
Email Address required
Address 1 is required
City is required
Postcode is required
Country is required

The information that you provide will help us deliver relevant information to you regarding our products and services. Checking this box indicates that you have read and agreed to our terms of use and privacy policy. Please read these terms to understand how we protect and manage your data.

Fast Facts

Coverage 1 or 6 m².
Curing Time (hours) Watco Tack Coat should be sufficiently tacky to overlay after approximately 60 minutes at 15ºC - 20ºC, but this will be extended to 3 hours at 5ºC.
Recommended Coats 1

Accessories & Tools

Product Details remove

Watco Tack Coat is an epoxy resin adhesive primer for use before screeding with Watco Concrex® or before using Watco Concrex® Vertical. Watco Tack Coat Sub Zero is available for repairs during cold conditions.

RECOMMENDED AREAS OF USE

  • Suitable for internal or external applications
  • Can be applied over existing paint, but all poorly bonded paint must be removed and well bonded paint roughened to provide a key

FEATURES

  • Quick and easy to mix and apply
  • Watco Concrex® can be applied within 30 - 60 minutes
  • Watco Tack Coat cures in temperatures as low as -20°C

Specifications add

Usage Interior / Exterior Interior or exterior.
Properties An adhesive primer, used with Watco Concrex or before Watco Concrex Vertical grade, quick and easy to use.
Surfaces Floor, wall, ramps, steps.
Coverage 1 or 6 m².
Curing Time (hours) Watco Tack Coat should be sufficiently tacky to overlay after approximately 60 minutes at 15ºC - 20ºC, but this will be extended to 3 hours at 5ºC.
Pot Time (hours) 20 minutes maximum at 20°C when decanted into a shallow tray. Higher temperatures will reduce the pot life.
Recommended Coats 1

How to Apply add

SURFACE PREPARATION

Concrete Ensure surface is clean and free of all loose material. Watco Tack Coat may be applied over existing paint but all poorly bonded paint must be removed and well bonded paint roughened to provide a key. Check that there is no ice in the substrate.

Metal Remove any loose or flaking material and rust by wire brushing or disc grinding. Oil or grease should be removed with Watco Bio D and the metal allowed to dry. Watco Tack Coat should be applied immediately after cleaning and drying.

MIXING

Pour the contents of the smaller tin into the larger tin and mix thoroughly with a wide bladed tool. When using the 6m² pack decant into a shallow tray. Do not leave mixed components in the tin - the product will quickly become unusable and the tin become hot. Use immediately, the pot life of the mixed components is 20 minutes maximum at 20ºC, less at higher temperatures.

APPLICATION

Apply sparingly by roller or brush and allow to become ‘tacky’. Overlaying must be completed while the Watco Tack Coat is still tacky. This product should be applied above 10ºC to ensure proper curing.

Accessories & Toolsadd

Associations, Awards & Standards


Legal Policy | Privacy Policy | Cookie Policy
© 2019 Watco Group, Registered in England - Number 459144. VAT number 310927818