Makes slippery ladder rungs safe even when wet or oily
Avoid accidents when working at height with Watco GRP Ladder Rungs. Watco GRP Ladders Rungs are formed with 4mm thick fibreglass with a gritted surface, to provide good grip, even if the ladder becomes wet or oily. Formed of 4mm thick fibreglass with a gritty surface for a good grip even when wet or oily.
We recommend fixing into place using our high strength GRP Polyurethane Adhesive fitted into a skeleton gun. A 295ml tube of adhesive should be sufficient for approximately 10 rungs. Avoid application during wet or cold conditions.
| Pendulum Slip Test Values | |
| Dry PTV | Wet PTV |
| 65 Low slip potential | 60 Low slip potential |
| Properties | Gives ladders a good grip even when wet or oily |
| Suitable for | Wood, metal or aluminium |
| Interior or Exterior | Exterior, Interior |
| Length | 300mm |
| Width | 38mm |
If you need to cut the GRP product, a good quality abrasive disc, jigsaw or hacksaw can be used. The GRP material is quite tough to cut by hand, so if power tools are not readily available, please ask about our cut to size service.
Lay the items in place to ensure that they fit. Trim using a jigsaw with medium cutting blades (Bosch TI01 AIF or similar are ideal).
Fix in place with Watco Polyurethane Adhesive, ensuring the surface is suitably clean and dry beforehand.
£16.40 (Ex VAT)
In stock
Bonds GRP to substrate where screw fixing is not possible
Watco GRP Ladder Rungs
