Prepare floors with no odours. Biodegradable degreaser that can be used on concrete, asphalt, sand and cement in any confined spaces or where strong odours would be a problem.
At Watco, we know choosing the right product for the job is of the upmost importance, therefore if you require a sample of any product simply fill in the below form and we will send one out to you. If you require help deciding which product best suits your project, you can speak with our technical experts directly Monday - Friday, 8:00 - 17:30 on 01483 418 418 or alternatively provide as much information as possible and we will contact you.
Our technical advisors are dedicated to providing accurate quotes. If you need a specific quote for your project, please fill in the form below, providing as much detail as you can in the 'Quote Details' box. <br> <br> Alternatively, you can speak with our technical experts directly Monday - Friday, 8:00 - 17:30 on 01483 418 418.
| Usage Interior / Exterior | Interior or exterior. |
| Recommended Coats | 1 |
| Coverage | Approx. 20m² per 5 litres and 100m² per 25 litres for heavy contamination. |
| Primer Required | No primer necessary. |
| Usage Interior / Exterior | Interior or exterior. |
| Properties | Virtually solvent free, biodegradable, ideal for preparation prior to painting, simply rinse away or mop up with absorbent granules, ideal for confined or odour sensitive areas, fine on most painted surfaces. |
| Surfaces | Floor, wall, ramps, steps, roof. |
| Recommended Coats | 1 |
| Coverage | Approx. 20m² per 5 litres and 100m² per 25 litres for heavy contamination. |
Give the container a shake prior to application.
Floor preparation prior to painting:
Floors with heavy contamination – should be reasonably dry for Bio-D to be most effective. Brush in undiluted Watco Bio-D with a stiff broom, scrub and leave it for at least 15 minutes to allow it to penetrate and to lift the contamination out of the surface. Scrub the floor again with a stiff broom or a mechanical scrubber to loosen the dirt deposits. Rinse with clean, cold water
preferably whilst continuing to scrub. If further applications are required, the floor should be reasonably dry before repeating the process.
Floors with light-medium contamination – as above but Bio-D may be diluted.
Floor Maintenance - Apply undiluted Watco Bio D with a stiff broom to the surface and leave for 5-10 minutes for penetration. Then scrub with a stiff broom or mechanical scrubber. Rinsing with clean cold water will float away oil and grease. Bio-D can be diluted with up to 10 times water for cleaning existing painted or bare floor surfaces
Machinery - Liberally coat oily and greasy parts using a soft brush. Leave for 5 -15 minutes according to hardness of oil or grease, then rinse well with water. Protect materials that might be damaged or must not become wet.
Warning: Watco Bio D is biodegradable, but a mixture of Bio D, oil and grease should not be allowed to enter rainwater drains or open water courses. The mixture can be removed from the floor using a wet vacuum and disposed of as chemical waste.
Surfaces cleaned with solvent based degreasants generally require the use of a second stage cleaner to remove residues prior to painting. Surfaces washed with Watco Bio D and then rinsed with water are left ready for painting. May be diluted with water for removal of light to medium contamination.
Associations, Awards & Standards
Technical Data Sheet
