Your browser version is not officially supported, and you may experience a degraded service. Please upgrade your browser.

How to Protect High Traffic Exterior Surfaces

With Heavy Duty Anti Slip Traffic Paint

Coverage: 15-20m² per 5L
Curing time: 8 hours
Coloured, high sheen textured gloss finish

How to Apply Watco Heavy Duty Anti Slip - Step-by-Step Guide

Looking to protect and enhance high-traffic exterior surfaces like car parks, pedestrian walkways, and hazard zones? Watch our step-by-step guide on how to apply Watco Heavy Duty Anti Slip Traffic Paint to achieve a durable, slip-resistant surface that stands up to both pedestrians and vehicles. Perfect for facility managers seeking reliable, long-lasting solutions for asphalt, concrete, and other exterior surfaces.

By the end of this video, you'll know exactly how to get a professional finish with Watco Heavy Duty Anti Slip Traffic Paint making your floors look better and last longer.

 

What you'll need

Application guide and eBooks

Achieve a durable professional finish with Watco Heavy Duty Anti Slip Traffic Paint using our step-by-step guide, covering surface prep, mixing, and application for a professional finish. 

Alternatively, for more information on painting your floors, our comprehensive painting eBook has everything you need to know.



Video Transcript: 

How to Protect High Traffic Exterior Surfaces with Watco Heavy Duty Anti Slip Traffic Paint.

What you'll need:

  • Watco Heavy Duty Anti Slip Traffic Paint
  • Watco Painting Kit
  • 12“ Roller Frame & Telescopic Handle
  • Plastic Scuttle
  • 2“ and 5“ Paint Brush
  • Mixing Blade

STEP 1 – PREPARATION

  • Thoroughly clean the surface to ensure it is free of dust and dirt. For the removal of grease and oil on new or existing asphalt and tarmac use Watco Concroff.
  • If the concrete is new or bare, remove surface laitance, dust and any light dirt or grease deposits using Watco Etch & Clean.
  • Mark out the area to be painted with masking tape to ensure clean, even edges. 

STEP 2 – MIXING

  • Remove the three inner tins. 
  • Stir the content of the tins thoroughly.
  • Pour the mixed components back into the larger outer tin.
  • Scrape around the inside of the tin to remove all the contents.
  • Mix in the anti slip aggregate.
  • Stir thoroughly until a consistent colour is achieved.
  • Pour the coating into a plastic scuttle for immediate use. 

STEP 3 – APPLICATION

  • Apply one coat with a medium pile roller.
  • Work well into the surface. 
  • If a second coat is needed, apply immediately once dry.
  • This is generally after 6 hours and must be within 5 days of the first coat.
  • In approximately 8 hours the surface is ready to use. 

 

WATCO HEAVY DUTY ANTI SLIP TRAFFIC PAINT

Tough, easy and long-lasting protection for exterior surfaces.

All the latest news and offers

Subscribe to our newsletter and receive 10% off your next order!