Looking to create an anti-slip surface on steps, ramps, wet or oily floors, Safety coat has you covered. Watch our step-by-step guide on how to apply Watco Safety Grip to create a tough, slip resistant surface that maximises safety underfoot around machinery, on steps, ramps or even loading bays, entrance ways and car parks. With outstanding test results for adhesion, hardness and slip resistance, itโs easy to see why Safety Grip has been our bestselling anti-slip coating for over 40 years.
๐ ๐๐ถ๐ป๐ธ๐ ๐ฎ๐ป๐ฑ ๐ฟ๐ฒ๐๐ผ๐๐ฟ๐ฐ๐ฒ๐:
- Watco Safety Grip
- Watco Painting Kit
- Free Guide to Safety Underfoot
- Free Guide to Paint and Application Tips
๐ค๐๐ถ๐ฐ๐ธ ๐น๐ถ๐ป๐ธ๐:
00:00 Start
00:14 What you will need
00:25 Step 1, Preparation
01:01 Step 2, Mixing
01:55 Step 3, Application
By the end of this video, you'll know exactly how to get a professional finish with Watco Safety Grip making your floors look better and safer for employees and visitors.
______________________________________________________________
๐ง๐ฟ๐ฎ๐ป๐๐ฐ๐ฟ๐ถ๐ฝ๐:
How to Provide Safety Underfoot Inside and Outside, with Watco Safety Grip
What you'll need:
- Watco Safety Grip
- Watco Painting Kit:
- 12โ Roller Frame & Telescopic Handle
- Plastic Scuttle
- 5โ and 2โ Paint Brush
- Mixing Blade
STEP 1 โ PREPARATION
Ensure substrate is free from dust and dirt.
Thoroughly sweep the surface to remove the dust.
If the concrete is new or bare, remove surface laitance, dust and any light dirt or grease deposits using Watco Etch and Clean.
If the surface has heavy deposits of grease or oil, use Watco Concroff or for painted surfaces, Watco Bio-D.
STEP 2 โ MIXING
Remove the three inner tins.
Stir the content of the tins thoroughly.
Pour the mixed components back into the larger tin.
Scrape around the inside of the tin to remove all contents.
Stir thoroughly to ensure it is well mixed with an even colour.
Pour the coating into a plastic scuttle for immediate use.
STEP 3 โ APPLICATION
Use a paint brush to cut in around the edges of the surface.
Apply using a medium pile roller (not foam).
Work in measurements of 5m2 areas.
Immediately sprinkle the anti slip aggregate evenly onto the wet coating.
Sprinkle the aggregate to achieve your desired finish, total or light coverage.
Using the same roller, roll over the sprinkled aggregate to bed in and create an even finish.
WATCO SAFETY GRIP
The toughest anti slip coating for steps and ramps.
