Keeping external concrete and asphalt surfaces in good condition is a challenge. Constant wear and tear from vehicles, machinery and equipment as well as foot traffic can wear down a coating over time and impact its performance.
We offer a wide range of external paints and coatings, but the right choice for you can depend on several factors. Continue reading to learn more about the differences between our formulations to find a solution that matches your needs.
These exceptionally durable, two pack, epoxy resin formulas contain a solvent that penetrates asphalt and concrete surfaces to ensure maximum adhesion.
For a smooth, professional finish in a range of different colours
Composition: Single pack, water based acrylic
Finish: Matt, smooth
Minimum application temp: 15°C
Curing time: 24 hours at 20°C
Available colours:
For slip resistance in areas where increased safety is required
Composition: Single pack, water based acrylic
Finish: Matt, fine anti slip texture
Minimum application temp: 15°C
Curing time: 24 hours at 20°C
Available colours:
For a durable coating ready for foot traffic in as little as two hours
Composition: Single pack chlorinated rubber
Finish: Matt, smooth
Minimum application temp: 5°C
Curing time: 2 hours at 20°C
Available colours:
For steps, ramps and floors, in wet or oily areas. Coarse anti slip finish to reduce accidents
For loading bays, walkways and entrances incl wet, oil and heavily trafficked areas. Cures at 0°C
Chlorinated rubber paint for heavy duty line marking
Seals and resurfaces damaged and worn asphalt. Roll-on. No primer needed
Get old asphalt looking as good as new with just 1 coat
The ultimate anti slip floor coating for inside and out
