Your browser version is not officially supported, and you may experience a degraded service. Please upgrade your browser.
Delivery options
Next day delivery slots available upon request. Call us on 01483 418418 for details.
Frequently bought together


Recommended areas of use

  • This anti slip tape is an easy and highly effective way to improve safety
  • Use on concrete, wood, metal and painted surfaces


  • Tough aluminium oxide grit for great slip resistance and long life
  • Ideal for indicating hazardous areas or safe escape routes
  • Long lasting and consistent colour - custom colours are available in rolls of any size up to 1m wide x 18m long with a minimum order of 1000m²
  • When used externally we suggest that this product is used with Safety Tape Primer
  • Helps meet the requirements of the Disability Discrimination Act (DDA) and 2004 Building Regulations


Properties Self adhesive, ideal for indicating hazardous areas, long lasting, anti slip
Suitable for Concrete, timber, brick, stone, metal
Interior or Exterior Exterior, Interior
Primer required Yes, on dusty, porous or gritty surfaces
Minimum application temperature 10°C
Roll length 18m


Surface preparation

Apply to clean, smooth, dry surfaces such as painted or varnished wood, concrete, metal, tiles, and Terrazzo. Apply direct to smooth, hard concrete; dusty concrete will require a primer.


Smooth, non porous, dust free surfaces do not require priming. To improve adhesion on weak, dusty surfaces, apply a coat of Watco Safety Tape Primer.


If appearance is critical we recommend the application of a small trial area first.

Avoid application at temperatures below 10°C. Low temperatures can reduce adhesion. On steps and nosings, apply the product approximately 10mm in from the edge to prevent premature wear and edge curl. Peel back the backing strip approximately 50mm to reveal the adhesive layer. Avoid removing too much of the backing strip, but slowly keep peeling it back whilst firming the product into place. Firming down by hand or foot pressure is generally sufficient.


Although the product can be walked on virtually straight away, the adhesive can take 24 hours to set fully. Immediately after placing the item onto the substrate, it can be peeled off reasonably easily. Please allow the adhesive to set if using in heavily trafficked or hazardous areas.

Data sheets

Data sheets

Technical data sheets

Technical Data Sheet
Ask a question


Be the first to ask a question...

Ask a question
0 questions / 0 answers

£17.80 (Ex VAT)

In stock

Delivery options
Next day delivery slots available upon request. Call us on 01483 418418 for details.

Tools and accessories

Watco Safety Tape Barefoot

All the latest news and offers

Subscribe to our newsletter and receive 10% off your next order!