When you need a pourable repair for a deeper concrete hole
| Quantity | Price per item | Discount |
|---|---|---|
| 1+ | £123.30 | - |
| 6+ | £110.95 | Save 10% |
| Bulk discounts applied in basket | ||
Watco Flowpatch Deep Fill® is ideal for repairing or levelling deeper holes between 10-200mm in concrete flooring. Its very strong formula will harden quickly and will accept heavy traffic including forklifts only 2 hours after application.
| Properties | Quick setting, pourable patch repair for heavily trafficked floors, just add water, mix and pour, slip resistant finish, sets at low temperatures |
| Suitable for | Concrete |
| Finish | Smooth |
| Interior or Exterior | Exterior, Interior |
| Primer required | No primer required |
| Composition | Reinforced cement & polymer powder |
| Coverage | Approximately 0.25m² at 50mm thick per 25kg |
| Application tools | Steel float or trowel |
| Application | Pour into hole |
| Curing time (at 15°C) | 2 hours |
| Minimum application temperature | 5°C |
| Pot life | 5-10 minutes |
| Storage | Do not allow to freeze |
| Shelf life | 12 months in unopened container |
| Depth | 200mm |
| Cleaning tools | Remove excess with a cloth or scraper and wash with water before the product sets |
Mix the water at the following ratio: 1kg of powder to 200ml of water.
Due to the short working life of the mixed product, we recommend you carry out the mixing near to the repair and not near to the water source. Put the water into the empty bucket and gradually add the powder stirring constantly to achieve a pourable slurry.
When a smooth consistency is achieved, simply pour it in to the hole.
Approximately 5 to 10 minutes at 20°C, so do not mix at one time more than you can use within a few minutes.
| Quantity | Price per item | Discount |
|---|---|---|
| 1+ | £123.30 | - |
| 6+ | £110.95 | Save 10% |
| Bulk discounts applied in basket | ||
