Rapid, ultra-strong repairs to deep holes in concrete
|Quantity||Price per item||Discount|
|Bulk discounts applied in basket|
Watco Concrex® Deep Fill Rapid has been formulated to help get your floor back in use quickly and can be applied at temperatures above 10°C.
|Suitable for||Concrete, metal, brick, masonry|
|Interior or Exterior||Exterior, Interior|
|Primer required||Not usually. Watco Tack Coat is recommended on smooth or damp surfaces|
|Composition||2 part epoxy resin|
|Coverage||0.5m² per 25kg at 30mm thick|
|Application tools||Steel or float.|
|Application||Trowel firmly into the repair|
|Curing time (at 20°C)||2 hours|
|Minimum application temperature||10°C|
|Pot life||30 Minutes - 1 hour|
|Storage||Between 10°C - 30°C. Do not allow to freeze|
|Shelf life||12 months in unopened container|
|Principle limitations||Do not apply to wet surfaces. Watco Tack Coat should be used for application to smooth or damp surfaces before applying Watco Concrex Deep Fill products. Do not apply thicker than 100mm in one layer - see section headed 'Application'. Watco Concrex Deep Fill Products should not be subjected to temperatures above 60°C|
Surfaces should be clean, dry and free of all loose material. Wire brushing or sweeping is generally sufficient. Watco Bio-D degreaser can be used to remove grease and oil.
A primer is not usually required if patch or crack repairing. Watco Tack Coat adhesive primer is recommended when applying Watco Concrex as a thin section screed or when applying to smooth, non-porous or metal surfaces.
Each Watco Concrex pack contains a granular resinous compound and separate containers of curing agent. The components are mixed with a trowel according to the simple instructions in the pack until a smooth grey mortar is obtained. The more thorough the mixing, the ‘wetter’, smoother and more manageable the mix becomes. This can be achieved quite quickly by wearing disposable gloves and kneading the mixture by hand. A creteangle or similar mixer can be used to ensure thorough mixing of larger quantities. This is trowelled firmly against the surface to be repaired, and finished with a trowel or float. To prevent drag on the trowel, a rag moistened with white spirit may be wiped across the face of the tool.
Watco Concrex Deep Fill Rapid