How to Achieve a Hard Wearing Painted Floor for Heavy Wear Areas with Epoxy Gloss Coat

How to Apply Watco Epoxy Gloss Coat - Step-by-Step Guide

In this video, we'll walk you through the process of applying Watco Epoxy Gloss Coat to achieve a hard-wearing, high-gloss finish for heavy wear areas. transform your surfaces creating a durable, high-gloss finish. Whether you're working on a concrete floor, a garage, or any other high-traffic area, Watco Epoxy Gloss Coat offers incredible protection and a smooth, glossy finish that lasts for years. 

By the end of this video, you'll know exactly how to get a professional finish with Watco Epoxy Gloss Coat, making your floors look better and last longer. 

𝗟𝗶𝗻𝗸𝘀 𝗮𝗻𝗱 𝗿𝗲𝘀𝗼𝘂𝗿𝗰𝗲𝘀:

• Watco Epoxy Gloss Coat
• Watco Painting Kit
• Free Guide to preparing your floors
• Free Guide to tips of paint and application tips

𝗤𝘂𝗶𝗰𝗸 𝗹𝗶𝗻𝗸𝘀: 

• 00:00 Start 
• 00:12 What you will need 
• 00:25 Step 1, Preparation of the surface 
• 00:46 Step 2, Mixing Epoxy Gloss Coat 
• 01:25 Step 3 Application of Epoxy Gloss Coat

Don't forget to like, comment and subscribe for more tips and tutorials!

Video Transcript: 

How to achieve a hard wearing painted floor for heavy wear areas with Watco Epoxy Gloss Coat. 

What you'll need:

• Watco Epoxy Gloss Coat
• Watco Painting Kit
• 12“ Roller Frame & Telescopic Handle
• Plastic Scuttle
• 2“ and 5“ Paint Brush
• Electric Drill fitted with Mixing Blade 

STEP 1 – PREPARATION 

• Thoroughly clean the surface to ensure it is free of dust and dirt. 
• If applying to hard, smooth, powerfloated concrete use Watco Powerfloat Primer. 
• If the concrete is new or bare, remove surface laitance, dust and any light dirt or grease deposits using Watco Etch and Clean. 

STEP 2 – MIXING

• Remove the two inner tins.
• Stir the content of both tins thoroughly. 
• Pour the mixed components back into the larger tin. 
• Mix thoroughly with a mixing blade until even in colour and consistency. 
• Pour the coating into a plastic scuttle for immediate use. 

STEP 3 – APPLICATION

• Use a paint brush to cut in around the edges of the surface. 
• Apply using a medium pile roller. Best results are obtained in warm (minimum 15C), dry conditions with good ventilation. 
• The coating will darken slightly as it cures, and it should not be over rollered. 
• The second coat can be applied as soon as the first coat is dry (generally 4-6 hours). 

WATCO EPOXY GLOSS COAT An ideal choice for an attractive, low maintenance, hard wearing floor finish.