Repair damaged asphalt

Give the area a good sweep to ensure that the substrate is free from dust, dirt and loose material.

Grease or oil should be removed by either scraping out or using a suitable degreaser, such as Watco Bio D.

Remove the bag of powder and empty the contents into the plastic tub. Protective equipment such as a mask and safety glasses should be worn.

Gradually add water to the bucket. A mixture of 1 parts clean, cold water to 3 parts powder. Mix thoroughly until a smooth, even consistency is obtained. Mix near to the repair as the mixture will need to be used immediately.

Pour the mixed components into the damaged area.

Flowpatch Asphalt Repair is self-levelling so requires minimal effort, however we recommend using a trowel to ensure the mixture is distributed evenly.