with Concrex Carbon Fibre
Watco Concrex® Carbon Fibre, our best-selling floor repair mix, offers a fast, permanent and strong solution formulated to last where ordinary mortars fail. It has a granite-hard finish that is impervious and non-dusting, and is virtually indestructible, being 8 times stronger than concrete. With minimal prep time, Conrex Carbon Fibre saves on labour costs, allowing for mixing and application in minutes. It ensures long lasting repairs in industrial heavy wear areas, curing in 5-6 hours. For the added benefit of curing in cold temperatures, consider Concrex Cold Set.
For super strength long lasting repairs to concrete floors, ramps & steps
High strength 100% solids epoxy resin adhesive primer
Ideal for mixing, applying and levelling repairs
Thoroughly clean the damaged area. In the event of contamination with oils and grease, we recommend using a suitable cleaner, such as Watco Concroff.
For very shallow repairs or screeding. Watco Tack Coat is essential to ensure maximum adhesion to the substate.
Empty the epoxy resin and sand mixture into a Watco Concrex Mixing Tub. Create a well in the middle of the sand mixture, then pour in the curing agent, ensuring all the bottles are completely empty.
Wearing rubber gloves, mix the components together by hand until you get an evenly coloured light grey mixture.
Apply the mixed epoxy resin mortar to the damaged area. Making sure to compact the mixture into the hole.
Smooth over the surface with a trowel. To avoid marks or scratches on the surface, wipe the trowel with a damp cloth. This also prevents the mortar from sticking to the trowel.
Learn how to repair a damaged hole from start to finish with Watco Concrex Carbon Fibre at your own pace using our helpful How-to Video.
