Helps prevent accidents in car parking areas
Watco Parking Bumpers offer protection against accidents in car parking areas. Made from recycled rubber, they are resistant to grease and acids, and can withstand temperatures of -40°C to 80°C.
Properties | High visibility, grease and acids resistance |
Suitable for | Car parks, glass fronted buildings, showrooms. It can also be used to separate traffic routes, e.g. bicycle and pedestrian paths |
Interior or Exterior | Exterior |
Depth | 100mm |
Step 1 - Lay Watco Parking Bumpers down in desired position.
Step 2 - Using a 14mm drill bit, drill pilot holes in the ground through the Watco Parking Bumpers.
Step 3 - Remove Watco Parking Bumpers and drill holes to a depth of 80mm.
Step 4 - Place plastic plugs (supplied - 2 for the 900mm and 4 for the 1800mm length) into drilled holes.
Step 5 - Place Watco Parking Bumpers back in position and bolt down into the plastic plugs.
£100.25 (Ex VAT)
In stock
Watco Parking Bumpers