Watco Decksafe Advanced

An ultra durable non slip finish for decking. Prolongs life of decking

Only one coat required
Protects decking and makes it safe
Resists UV fading and discolouration
Flexible, two part polyaspartic resin
Excellent slip resistance. PTV (wet) 67

Delivery options

Next day delivery slots available upon request. Call us on 01483 418418 for details.

Watco Decksafe® Advanced uses the latest polyaspartic resin technology for an exceptionally durable protective and anti slip deck coating. It has outstanding abrasion resistance and will resist chalking, fading, weathering and has exceptional resistance to UV. Watco Decksafe® Advanced will also tolerate movement and vibration without cracking.

Features

Helps protect and prolong the life of the decking
Textured to create an anti slip finish
Will resist UV fading and discolouration
Excellent resistance to chemical spillage
Easy to apply with a short pile roller or brush
Flexible to resist cracking
Excellent abrasion resistance
In dry conditions can be applied in temperatures ranging from -10°C to +30°C
Packsize: 2.5L

Please be aware

The grit included in this product is white which may impact the appearance of dark wood.
If you apply this product to damp decking you may find that it dries with a white bloom effect. Don't worry, this will disappear after a few days. However, we don't recommend you use it on really wet decks or in the rain.

Specification

Properties	Protect and prolong the life of decking, and give an anti slip finish
Suitable for	Wood
Finish	Glossy, textured
Interior or Exterior	Exterior, Interior
Primer required	No primer required
Composition	2 part polyaspartic resin with aggregate
Coverage	Approximately 20m² per 2.5L
Recommended number of coats	1
Dry film thickness	100 microns
Curing time (at 20°C)	6 hours
Minimum application temperature	-10°C

Application

Surface preparation

Surfaces to be treated should be clean, dry and free from mould or any other surface contaminant likely to cause adhesion problems, such as wax, grease, oil etc. Some pre-treated woods are sealed which can create adhesion problems. Splash on a small amount of water. If beading occurs the surface will need to be lightly sanded, to create a key, or left and re-tested at a later date.

Application

If appearance is critical we recommend the application of a small trial area first.

Stir thoroughly with a broad stirrer before use. A short pile roller is recommended but a brush may be used for small areas. Apply two full coats.

Data sheets