search
0

£0.00

local_shippingFree delivery over £500
forumExpert help & advice
credit_cardInstant credit available
verified_userMoney back guarantee
;
.

Watco Fastcoat 2.5L

Quick’s the word with our fastest floor paint. Fastcoat is a brilliant new resin formulation that allows you to have your floor cleaned, prepared and painted within a single day. Uniquely developed by Watco’s paint chemists, Fastcoat is a revolution in floor coatings that has only been made possible by recent developments in polyaspartic resin technology.

 



Qty
remove add


Close

Request a Sample


At Watco, we know choosing the right product for the job is of the upmost importance, therefore if you require a sample of any product simply fill in the below form and we will send one out to you. If you require help deciding which product best suits your project, you can speak with our technical experts directly Monday - Friday, 8:00 - 17:30 on 01483 418 418 or alternatively provide as much information as possible and we will contact you.


Message is Required
First Name required
Last Name required
Email Address required
Address 1 is required
City is required
Postcode is required
Country is required

The information that you provide will help us deliver relevant information to you regarding our products and services. Checking this box indicates that you have read and agreed to our terms of use and privacy policy. Please read these terms to understand how we protect and manage your data.

Close

Request a Quote


Our technical advisors are dedicated to providing accurate quotes. If you need a specific quote for your project, please fill in the form below, providing as much detail as you can in the 'Quote Details' box. <br> <br> Alternatively, you can speak with our technical experts directly Monday - Friday, 8:00 - 17:30 on 01483 418 418.


Message is Required
First Name required
Last Name required
Email Address required
Address 1 is required
City is required
Postcode is required
Country is required

The information that you provide will help us deliver relevant information to you regarding our products and services. Checking this box indicates that you have read and agreed to our terms of use and privacy policy. Please read these terms to understand how we protect and manage your data.

Fast Facts

Finish Coloured, high gloss, smooth (anti slip also available).
Number of Coats 2
Coverage 25m² per coat onto a non-porous surface. 10-15m² onto a porous or textured surface. If applying in temperatures below 0°C coverage may be reduced.

Accessories & Tools

Product Details remove

Watco Fastcoat is a new type of resin formulation that allows you to have your floor cleaned, prepared and painted within a single day.

Uniquely developed by Watco’s paint chemists, Fastcoat is a revolution in floor coatings that has only been made possible by recent developments in polyaspartic resin technology. Our unique formulation uses this incredibly versatile resin to produce a high grade, high performance paint for heavily used areas both inside and outside.

Fastcoat is also available in an anti slip finish. The anti slip particles are pre-blended (in the resin) which makes it easier to clean and to achieve a uniform finish. Both Fastcoat and Fastcoat Anti Slip carry CE Mark EN1504-2 and have impressive test results for abrasion and impact resistance, as well as for adhesion and hardness.

RECOMMENDED AREAS OF USE

• Production Areas
• Warehouses
• Showrooms
• Workshops
• Loading bays
• Cold stores, walk-in fridges and freezers
• Interior and exterior

FEATURES

• Revolutionary, high performance, two part, polyaspartic resin formulation
• Exceptionally fast curing - apply 2 coats in one day to reduce downtime
• Extremely strong – easily copes with very heavy traffic
• Superior abrasion and scratch and resistance
• Can be applied at low temperatures as low as -10°C and as high as 25°C
• Excellent resistance to UV and weathering
• Superior performance demonstrated by ISO testing to CE Mark EN1504-2

Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance
-10°C 24 hours 16 hours 30 hours 72 hours  14 days
0°C 12 hours 8 hours 16 hours 30 hours 14 days
10°C 6 hours 4 hour 8 hours 16 hours 7 days
20°C 4 hours 2 hour 6 hours 16 hours 7 days
Light Traffic: Foot, trolley, pallet truck, occasional forklift
Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

Products You May Be Interested In remove

Fastcoat Primer Details
Toughline 1L
grade
grade
grade
grade
(1)
Details
Concrex Fine Filler, quick and easy resin paste for filling small gaps, cracks and holes in concrete and masonry Concrex Fine Filler 1.5KG Details
Fine Crack Filler Details

Specifications add

Composition High solids, polyaspartic resin.
Number of Components 1 x curing agent and 1 x resin.
Finish Coloured, high gloss, smooth (anti slip also available).
Primer Required Not usually. See section headed ‘Priming’ in 'How to Apply'.
Number of Coats 2
Dry Film Thickness 85 microns.
Wet Film Thickness 100 microns.
Usage Interior / Exterior Interior or exterior.
Application Tools Short pile roller. Cut in using a brush.
Min Application Temperature (°C) Air temperature -10°C, floor temperature -10°C.
Suitable For Concrete, asphalt (3 months old), sand and cement screeds, well bonded paint, some metals and wood. The moisture content of concrete should be less than 75% RH.
Coverage 25m² per coat onto a non-porous surface. 10-15m² onto a porous or textured surface. If applying in temperatures below 0°C coverage may be reduced.
Pot Time (hours) 15°C = 25 minutes. Less than 15°C = 30 minutes.
Mix Ratio 20 parts curing agent : 100 parts resin.
Cleaning Tools It is not practical to clean applicators and they should be discarded after use.
Shelf Life 12 months in unopened containers.
Cleaning Normal industrial cleaners - Watco Protect is ideal. Do not steam clean.
Storage Between 15°C-25°C for at least 8 hours prior to use. Do not allow to freeze.
Principle Limitations Do not apply to damp surfaces. When used outside, Fastcoat will seal the substrate and in poorly drained areas puddling could occur potentially creating a slippery surface, in such case use Fastcoat Anti Slip. Do not apply if rainfall is imminent. Most self-levelling compounds cannot be painted – please ask for details. Painting chequer paint can be a problem since coatings can wear prematurely off the ‘high spots’.

How to Apply add

SURFACE PREPARATION

Bare concrete – remove surface laitance, dust and any light dirt or grease deposits using Watco Etch & Clean. Watco Etch & Clean also etches smooth, bare concrete surfaces to provide a key. Flush with clean water and allow the surface to dry. For the removal of heavier deposits of oil and grease we recommend Watco Concroff, again, flush with clean water and allow the surface to dry.

New concrete – as a guide, new concrete should be left for eight weeks to dry. The surface should then be prepared using Watco Etch & Clean and thoroughly rinsed away and left to dry prior to applying this coating.

Painted surfaces – abrade to remove any weak or loose paint and check remaining paint is well bonded. Watco Bio D can be used to remove grease and oil from painted surfaces. Watco Concroff is a very powerful degreaser for contaminated bare concrete, (do not use on a previously painted surface since it can soften paint).

Application in low temperatures – If applying in cold conditions the mixed components should be used immediately, and ideally stored in a warm room at least 8 hours prior to use. Below 5°C it may be necessary to avoid processes which involve wetting the floor due to the difficulty in drying. A good sweep or mechanical brushing may be sufficient. The viscosity will be somewhat thicker at very low temperatures, reducing coverage a little. All surfaces must be -10°C or above and free from ice or water.

Priming – is not usually required, but for open textured, or very porous high suction surfaces, such as sand and cement screed, use Watco Fastcoat Primer to ensure a uniform finish and to prevent air entrapment bubbles. Very smooth or power floated concrete should also be primed with Watco Fastcoat Primer.

Metal – remove any rust or flaking material by disc grinding or wire brushing. Apply the coating immediately after preparation to the clean metal surface. Grease or oil can be removed using Watco Bio D. Allow the metal to dry before coating.

Galvanised Metal – Watco Galvaprime must be used to prepare galvanised metal.

Non-ferrous Metals – for advice, please contact our Technical Department.

Wood – must be sound, clean and dry. Unsuitable for ridged decking.

MIXING

Mix between 10°C and 25°C. Remove the two inner tins from the tall outer tin. Stir each tin thoroughly and pour all of the contents into the outer tin, (scrape around the inside of the tins to remove any residue). Mix the components together thoroughly using a spatula or similar wide bladed tool, (a piece of wooden batten is ideal). Continue mixing until an even colour and consistency are obtained. Do not mix more than one pack at a time. If a paint stirrer fitted to an electric drill is used, also use the spatula to blend in any unmixed material from the side and bottom of the tin. Do not dilute.

APPLICATION

Apply between -10°C and 25°C. Empty the mixed components into a paint tray and apply to the floor using a short pile roller, (not a medium pile or foam), ‘working out’ the coating into a thin paint film. A paint brush can be used for cutting in. Do not apply the paint too thickly since this will result in reduced coverage. A feature of polyaspartic coatings is that they should be applied as a thin film. If using Fastcoat Anti Slip, sprinkle the anti slip aggregate onto the wet first coat as you go and lightly re-roller. The second coat can be applied as soon as the first coat is dry (generally 4 hours at 20°C), and should be applied within 5 days. If more than 5 days elapse, the first coat should be slightly abraded, (or to avoid abrading, use one coat of Cold Set Primer) before the second coat is applied. Avoid washing the surface for 7 days.

SAFETY

Material Safety Data Sheets are available.

ORDERING

Available direct from Watco UK Limited and through agents worldwide. All Watco products are sold subject to the Company’s Standard Conditions of Sale. The Company and its representatives are often asked to comment on potential uses of Watco products which differ from those described in the Company’s data sheets. Whilst in such cases the Company and its representatives will always try to offer helpful and constructive advice, the Company cannot be held responsible for the results of such uses unless they are specifically confirmed in writing by Watco.

Accessories & Toolsadd

Associations, Awards & Standards


Legal Policy | Privacy Policy | Cookie Policy
© 2019 Watco Group, Registered in England - Number 459144. VAT number 310927818