A low tack masking tape for neat edges on smooth surfaces
Complete your paint or repair order with Watco Masking tape. This 50mm x 50m roll of masking tape is low tack for neat lines and edges on smooth surfaces.
We know how difficult it is to get a straight line when line marking, that’s why we recommend defining the edges of your application area with Masking Tape. Leave the masking tape in place for 1 to 2 hours until the paint is touch dry to ensure a clean edge. When ready, simply remove the masking tape and admire the professional finish.
Use with Watco Floor Joint Sealant for a smooth, clean application. Once the Joint sealant has been applied into the joint, finish off with a flat blade or knife to remove air bubbles, and then remove any masking tape before the sealant has set, drawing the tape across the sealant face, so that any excess sealant falls into the joint not alongside it.
|Properties||Low tack tape for neat lines and edges on smooth surfaces|
|Suitable for||Floors, walls, ramps, steps, roofs.|
|Surfaces||Smooth wood, concrete, sand, cement and metal|
|Interior or Exterior||Exterior, Interior|