In this video, we'll walk you through the process of applying Watco Asphalt Crack Filler. This rubberised bitumen based product makes crack repairs easy. It is suitable for car parks, school playgrounds and tarmac and asphalt surfaces.
By the end of this video, you'll know exactly how to repair and fill cracks in old asphalt and tarmac with Watco Asphalt Crack Filler, stopping water ingress and erosion damage.
For repairing and filling cracks in old asphalt and tarmac
Ideal for mixing, applying and levelling repairs
For easy application of pourable joint repair products
Repair damaged asphalt with Asphalt Crack Filler using our step-by-step guide, covering surface prep, mixing, and application for a professional finish.
Alternatively, for more information on undertaking repairs on your floors, our comprehensive repair eBook has everything you need to know.
Asphalt Crack Filler Application.
For cracks up to 3mm wide...
Using a spouted can or similar, simply pour the Asphalt Crack Filler into the crack. Smooth as needed and allow 2-4 hours to dry.
For cracks up to 3 and 25mm wide...
Pour the Asphalt Crack Filler into a mixing tub and gradually mix in small amounts of sand so to control the thickness of the product. Keep mixing and adding sand until it has the consistency of golden syrup. Now pour the mixture into the crack and smooth with a trowel. Allow 6-10 hours to dry.
Once dried, you can remove any residual tack with a light sprinkling of sand.
Correct consistency depends on crack size, but is approximately a 50:50 sand/resin mix.
For cracks larger than 25mm wide we recommend Watco Concrex.
