Close

Incoming Message

Basket (0)

The UK's leading direct supplier of industrial strength flooring products

(0)

Watco Heavy Duty Asphalt Paint

Watco Heavy Duty Asphalt Paint

From £104.50
(EXCL. VAT)
Colours and protects asphalt in heavy wear areas
Black Light Blue Light Grey Mid Green Mid Grey Safety Yellow Tile Red White
Add Items to Cart

* Required Fields

VIEW PRICE BREAKS

There are no price breaks available.

From £104.50
(EXCL. VAT)
Product details
Uses: Car park bays, traffic routes, playgrounds, warehouses, workshops, plant rooms or tennis courts.

  • Superior abrasion and wear resistance
  • Excellent resistance to UV and weathering
  • High pigment levels offer increased hiding power
  • Only one coat usually required
  • Flexible waterproof membrane
  • Can be applied to damp surfaces

    Watco Heavy Duty Asphalt Paint is based on a new type of resin system with superior wear resistance. Ideal for use in heavier wear areas where most water based paints would fail. One coat of this thick, flexible paint is generally sufficient and is easy and quick to apply by roller. Use contrasting colours to mark out walkways, traffic routes, cycle paths etc.

    Watco Heavy Duty Asphalt Paint can be used for main traffic areas and Watco Asphalt Paint used more economically for lighter traffic areas (colour shades of both products are similar). Watco Anti Slip Traffic Paint and Watco Heavy Duty Anti Slip Traffic Paint are available where slip resistance is required.

    Coverage approx. 20 – 30m² per 5 litres, per coat depending on texture of substrate. One coat is normally sufficient.

    Quick Links

    Safety Data sheet
    Technical Data Sheet
  • Specifications
    Delivery Time (Days) standard
    Primer Required no
    Usage - Interior / Exterior interior or exterior
    Usage - Surfaces floor
    Max Operational Temp (deg C) 45
    Coverage (m² per litre/kg) 4 to 6
    Application - Drying time (hours) 12 at 15 degrees
    Application - Recommended Coats 1 normally or 2 may be required on very rough or porous surfaces
    Preparation & Application
    Surface Preparation
    Watco Heavy Duty Asphalt Paint can be applied to asphalt, tarmac, masonry, bricks and breeze blocks. It also adheres well to concrete. Ensure the surface is clean, sound and dry although slight damp is acceptable. Damp down any porous surfaces, but do not leave standing water, before application. Watco Bio D is a solvent free degreaser which can be used on asphalt and similar surfaces. Watco Heavy Duty Asphalt Paint can be applied to existing paint providing all poorly bonded material is removed and glossy surfaces are dulled using abrasive paper.


    Application
    If appearance is critical we recommend the application of a small trial area first.

    Apply Watco Heavy Duty Asphalt Paint by brush or medium pile type roller. One coat is generally sufficient although a second coat may be required on very porous or very rough surfaces. Avoid applying too thickly. Do not apply externally if rain or frost is forecast or if the temperature is below 10ºC. The second coat can often be applied after as little as 1 hour depending on drying conditions.

    In exceptional temperature conditions advice should be obtained from Watco’s Technical Department.

    You might also need...

    Watco UK Ltd, Watco House, Filmer Grove, Godalming, Surrey GU7 3AL