Your browser version is not officially supported, and you may experience a degraded service. Please upgrade your browser.
Please note: Our offices and warehouse are closed on Friday 29th March - Monday 1st April. You can still place orders as usual via the website. Any orders placed during this time will be processed from Tuesday 2nd April when we return to business as normal.

Watco Toughline

Superior quality line marking paint for cold or exterior applications

  • Two part polyaspartic resin formula
  • Flexible and UV resistant
  • Ultra durable for heavy wear areas
  • Excellent chemicals resistance
Delivery options
Next day delivery slots available upon request. Call us on 01483 418418 for details.
Frequently bought together
Description

Description

Watco Toughline® incorporates the latest polyaspartic resin technology for a high quality, highly wear resistant line marking paint that can be applied as low as -10°C.

Recommended areas of use

  • Perfect line marker for unheated warehouses, walk in fridges, cold stores and loading bays
  • Particularly useful for exterior applications as it resists chalking, fading, weathering and UV discolouration

Features

  • Flexible
  • UV resistant
  • Takes heavy wear and tear
  • Excellent chemical resistance

Curing times are dependent on site conditions, but the following can be used as a guide:

Curing Times
 20°C5°C0°C-10°C
Recoatable4-5 hrs10-12 hrs16 hrs30 hrs
Light Traffic6-8 hrs18 hrs24 hrs36 hrs
Heavy Traffic12 hrs24 hrs   36 hrs48 hrs
Specification

Specification

Suitable for Concrete, asphalt, metal, wood, painted surfaces
Finish Gloss smooth
Interior or Exterior Exterior, Interior
Primer required No
Composition 2 part polyaspartic resin
Number of components 1 x resin, 1 x curing agent
Coverage 75m x 50mm wide line per litre
Recommended number of coats 1
Application tools Short pile roller, brush.
Dry film thickness 100 microns
Curing time (at 0°C) 24 hours
Curing time (at 5°C) 18 hours
Curing time (at 20°C) 6 hours
Minimum application temperature -10°C
Maximum application temperature 30°C
Pot life Up to 25-30 minutes at 15°C
Shelf life 12 months in unopened container
Cleaning Resistant to the normal range of industrial cleaners and most general chemicals. Strong degreasants should be tested first. Watco Floor Cleaner may be used
Cleaning tools Use Watco Cleaning Solvent TH99 to remove splashes or to clean tools before the product cures
Application

Application

Surface preparation

All surfaces must be -10°C or above and free from ice or water. Concrete to be treated must be at least four weeks old, completely dry and free of contaminants. Grease or oil should be removed with Watco Bio-D (or a similar emulsifying degreasant) and the area thoroughly washed off and allowed to dry. Very smooth concrete or concrete with surface laitance (a weak dusty layer) should be abraded or etched with Watco Etch & Clean to ensure adequate adhesion. The concrete should be thoroughly washed down and allowed to dry after treatment with Watco Etch & Clean. Previously painted surfaces should be thoroughly abraded by sanding to improve adhesion and to remove any weak or loose material. A trial area is advisable to test compatibility with previous coatings. Below 5°C it may be necessary to avoid processes which involve wetting the floor due to the difficulty in drying. A good sweep or mechanical brushing may be sufficient. Do not apply outside if rainfall is imminent. 

Mixing

Mix between 10°C and 25°C. Remove the two inner tins from the tall outer tin. Stir each tin thoroughly and pour all of the contents into the outer tin (scrape around the inside of the tins to remove any residue). Mix the components together thoroughly using a spatula or a similar wide bladed tool (a piece of wooden batten is ideal). Continue mixing until an even colour and consistency are obtained. Do not mix more than one pack at a time. If a paint stirrer fitted to an electric drill is used, also use the spatula to blend in any unmixed material from the sides and bottom of the tin. Do not dilute. Pot life is 25-30 minutes at 15°C

Application

If appearance is critical we recommend the application of a small trial area first. 

Apply between -10°C and +30°C. The viscosity will be somewhat thicker at very low temperatures, reducing coverage a little.

Ask a question

Q&A

Be the first to ask a question...

Ask a question
0 questions / 0 answers

£65.15 (Ex VAT)

Low stock

Do you know the size of the area?
Delivery options
Next day delivery slots available upon request. Call us on 01483 418418 for details.

Tools and accessories

What our customers say

Watco Toughline

All the latest news and offers

Subscribe to our newsletter and receive 10% off your next order!