Specially formulated, this is Watco’s best damp proofer yet. Hard wearing epoxy resin coating which protects and waterproofs walls and floors. Resists two bars of pressure.
Breathable and watertight. You can feel confident that areas prone to damp will stay dry with this waterproofer that’s vapour permeable and lets surfaces breathe easily.
Tough, seamless, flexible protection for your premises. Contain spillages and leaks in your plant rooms. Plant Room Coating is a waterproof, flexible and durable coating which fills bridges, joints and cracks in the surface to ensure ultimate waterproof protection in areas where spillages are likely to occur.
Available in Original, Cold Cure, Flex and Rapid formulations.
Turn dangerous and wet surfaces into a slip-free zone. You can't compromise on safety in areas of potential hazard and our coating offers complete reassurance.
This unbeatable formula seals and protects against attack from chemicals. Watco Bund Sealer’s new easier-to-apply formula, with glass flake reinforcement, guarantees exceptional resistance to chemicals.
Damp proof injection stops rising damp, meaning fewer holes need to be drilled
Flexible protection for heavy-wear areas – ideal for mezzanine floors, for example. Our two-pack polyurethane Flexicoat™ is a tough, ultra-flexible solution that both seals and waterproof floors, while filling smaller cracks to cut down on preparation time. £154.50 (E
Watco Epoxy Damp Proof Membrane can be used on new or old concrete and sand and cement floors to hold back damp. If a DPM has failed or perhaps was never installed in the first place, the features of this product will effectively suppress vapour and hold back damp. It can be overcoated after 16 hours with any Watco 100% solids coating such as Epoxicote High Build, Chemi-Coat, Safety Grip or Bund Sealer, etc and after 24-48 hours with a water based Watco coating such as Epoxy Gloss Coat or Safety Coat. One thick roller applied coating is sufficient on average or good quality concrete.