Floor marker for signalling temperature check areas
Watco Temperature Check Floor Markers are great for marking out areas where temperature need to be checked. They are long-lasting, and easy to apply - all you need to do is peel of the backing and stick them in place. The strong adhesive backing and tough industrial plastic top surface makes them ideal for heavily trafficked areas.
|Properties||Self-adhesive, ideal for maintaining social distancing rules.|
|Suitable for||Concrete, timber, brick, stone, metal. Floors, walls, doors, ramps, steps.|
|Interior or Exterior||Interior and exterior.|
|Primer required||Yes, on dusty, porous or gritty surfaces.|
|Curing time||Immediately ready for traffic.|
|Maximum application temperature||Avoid application at temperatures below 10°C. Low temperatures can reduce adhesion.|
Apply to clean, smooth, dry surfaces such as painted or varnished wood, concrete, metal, tiles, and Terrazzo. Apply direct to smooth, hard concrete; dusty concrete will require a primer.
Smooth, non porous, dust free surfaces do not require priming. To improve adhesion on weak, dusty surfaces, apply a coat of Watco Safety Tape Primer.
Avoid application at temperatures below 10°C. Low temperatures can reduce adhesion.
Begin by peeling back the backing strip reveal the adhesive layer. Avoid removing too much of the backing strip, but slowly keep peeling it back whilst firming the product into place. Firming down by hand or foot pressure is generally sufficient.
Although the product can be walked on virtually straight away, the adhesive can take 24 hours to set fully. Immediately after placing the item onto the substrate, it can be peeled off reasonably easily. Please allow the adhesive to set if using in heavily trafficked or hazardous areas.