Watco Firm-Step® Standard GRP Sheets

Makes slippery walkways, ramps, and fire escapes safe

An affordfable solution for medium traffic areas
3 years guarantee against breakage
Interior and exterior use
Free cut to size service

Dimensions:

Colour:

Delivery options

Next day delivery slots available upon request. Call us on 01483 418418 for details.

Watco’s general purpose Firm-Step® Standard GRP Sheets bring safety underfoot for medium foot traffic areas including walkways, ramps and mezzanine floors.

Recommended areas of use

Suitable for exterior and interior use, our Standard GRP Sheets can be applied to concrete, wood, stone, tiles and metal

Features

Can be used in conjunction with Watco Firm-Step® Standard GRP Step Covers
Available in a range of standard sizes or cut to size

Easy to maintain, Watco Firm-Step® Standard GRP Sheets can be cleaned with a stiff brush to remove everyday dirt. A mild detergent is recommended for more stubborn contamination. Fixings and adhesive should be checked regularly, based on the volume of foot traffic, but monthly inspections are advised.

Pendulum Slip Test Values
Top Surface	Dry PTV	Wet PTV
Coarse Grit	71 Extremely low slip potential	63 Extremely low slip potential

Specification

Properties	Resin bonded ceramic grit surface, superior durability
Suitable for	Medium traffic environments, walkways, ramps and mezzanine floors. Concrete, wood, stone, tiles and metal
Interior or Exterior	Exterior, Interior
Primer required	Recommended
Width	1200mm

Application

Preparation

Any damage or undulations to the substrate should be remedied to ensure the flat sheet will be on a reasonably flat and even surface. If using an adhesive, the substrate must be clean and dry and free from oils, grease, dust and any loose particles. The underside of the sheet must also be clean and dry. Where the substrate is contaminated (e.g. by oil), mechanical fixing is essential. Prior to applying any adhesive, it is advisable to carry out a dry-fit first to ensure a suitable fit.

Watco recommends a double fixing method for installing GRP anti slip sheets, consisting of a high strength adhesive or double sided tape such as Watco Mastic Adhesive or UltraBond Tape, both supplied by us, and mechanical fixings.

Application

We recommend screw fixing to most substrates, combined with Watco Adhesive Mastic to prevent rocking on uneven surfaces. Screws, fixing plugs and a free pre-drilling service are available if required. Alternatively, Watco UltraBond Tape and Primer can be used to bond the sheets to dry indoor floors.

For further instructions see Installation Guide.

Data sheets