Ultra-strong epoxy repair formula ready in 3 hours
Total price
£137.80 (Ex VAT)
Concrex® Rapid Set has the same features as the traditional Concrex® with the added benefit of fast curing.
| Properties | Incredibly tough, granite–hard finish, chemical–resistant, anti–slip, priming not normally required, impervious and non-dusting, may be feather-edged, ready for heavy traffic in 3 hours. |
| Suitable for | Concrete, metal, brick, masonry |
| Finish | Smooth, impervious surface. |
| Interior or Exterior | Interior and exterior |
| Primer required | Yes, Watco Tack Coat is recommended. |
| Composition | 2 part epoxy resin |
| Coverage | 1.2m² at 5mm thick per 10kg |
| Curing time | 2-3 hours at 20°C |
| Minimum application temperature | 10°C |
| Pot life | 30 minutes. |
Surfaces to be treated must be clean, dry and free of friable material, wire brushing or a sweeping is usually sufficient. Watco Bio-D degreaser can be used if there are spots of oil or grease.
Each bucket contains Concrex powder and bottles of hardener. Mix the two components with a trowel until you achieve a uniform grey colour, you can complete the mixing by using your gloved hands. For large quantities, it is advisable to use a mixer.
Apply the repair mortar to the surface to be repaired and smooth with a trowel. To prevent streaks, wipe the blade with a rag soaked in white spirit.
| Quantity | Price per item | Discount |
|---|---|---|
| 1+ | £99.00 | - |
| 6+ | £89.10 | Save 10% |
| 18+ | £79.20 | Save 20% |
| Bulk discounts applied in basket | ||
Contact our friendly and professional Technical Advisors for expert help and advice for your project. You can give us a call on 01483 418 418 or email sales@watco.co.uk
Contact us
