Single-pack, general purpose, light duty floor coating
Tor Tortread Single Pack Floor Paint is a single-pack general purpose, light duty floor coating. A tough urethane alkyd blended with long oil alkyd pigmented with pigments and thinned with low aromatic white spirit.
|Interior or Exterior||Interior|
|Coverage||10m² per litre, per coat|
|Recommended number of coats||2|
|Application tools||Short pile roller|
|Dry film thickness||47 microns|
|Curing time (at 20°C)||16 hours|
|Shelf life||24 months in unopened container|
|Principle limitations||Will only withstand pedestrian and light rubber wheeled vehicle traffic. Not suitable for heavy duty use or in high humidity areas such as showers or swimming pools etc.|
|Cleaning tools||Tor epoxy thinner TH98.|
Ensure all surfaces are clean, sound, dry and free from oil grease, grime and other surface contaminants.
Bare Concrete: Ensure dry (less than 5.5 on protimeter screed scale). Surfaces should be cleaned by best available method to remove laitance, oils, etc. and to “open up” substrate (eg. vacu-blast, disc grind, scabble, acid etch etc, hot compressed air treatment for deep oil removal). Apply Tor Stabilising Sealer (AK602) to prepared surfaces.
Previously Painted: Perform adhesion check. If suspect – remove existing paint. If sound – wash, degrease and abrade. Apply Tor Stabilising Sealer (AK602) to bare areas only.
Preferred short pile roller but can be airless sprayed (0.015” tip and 2000 psi atomising pressure). 2 coats normally required.
Tortread Single Pack Floor Paint