NEW
You're viewing our new website experience.
Tell us what you think
search
0

£0.00

.

Watco Safety Grip 5m²

Watco Safety Grip is a heavy duty, coarse textured, chemical resistant, anti slip two pack epoxy resin coating designed to provide a safe surface inside and out. You can’t compromise on safety in areas of potential hazard and our coating offers complete reassurance. 

Also available in a Cold Cure, Rapid and Flex version. See Product Details for more information.



Qty
remove add


Close

Request a Sample


If you know which product you need, please enter the product name and quantity. If you would like us to help you decide, please give a brief description of the space along with area size and whether internal or external.


Message is Required
First Name required
Last Name required
Email Address required
Address 1 is required
City is required
Postcode is required
Country is required

The information that you provide will help us deliver relevant information to you regarding our products and services. Checking this box indicates that you have read and agreed to our terms of use and privacy policy. Please read these terms to understand how we protect and manage your data.

Close

Request a Quote


Our technical advisors are dedicated to providing accurate quotes. If you need a specific quote for your project, please fill in the form below, providing as much detail as you can in the 'Quote Details' box. <br> <br> Alternatively, you can speak with our technical experts directly Monday - Friday, 8:00 - 17:30 on 01483 418 418.


Message is Required
First Name required
Last Name required
Email Address required
Address 1 is required
City is required
Postcode is required
Country is required

The information that you provide will help us deliver relevant information to you regarding our products and services. Checking this box indicates that you have read and agreed to our terms of use and privacy policy. Please read these terms to understand how we protect and manage your data.

Product Details remove

Watco Safety Grip, Cold Cure & Rapid are heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC.

Watco Safety Grip Rapid offers all the benefits of Safety Grip but it cures within 8 hours to withstand light traffic saving on downtime. Watco Safety Grip Cold Cure can be applied as low as 0°C, providing exceptional slip resistance in unheated areas or outside in the winter months. Watco Safety Grip Flex, a tough, flexible two pack polyurethane coating, provides a good level of flexibility for areas which may be subject to movement, such as metal or wooden ramps or around vibrating machinery.

RECOMMENDED AREAS OF USE

  • Slippery, hazardous, wet or oily areas
  • Around machinery
  • Steps, Ramps/ Disabled Ramps, Foot Bridges
  • Loading Bays, Walkways and Entrance Ways
  • Car Parks
  • Around vibrating machinery (see Safety Grip Flex)
  Temparature Recoat Time Touch Dry Light Traffic Heavy Traffic
Safety Grip 10°C
20°C
30°C
16 hours
12 hours
8 hours
12 hours
6 hours
4 hours
24 hours
16 hours
12 hours
36 hours
24 hours
24 hours
Safety Grip Rapid 10°C
20°C
30°C
12 hours
8 hours
6 hours
8 hours
4 hours
3 hours
16 hours
8 hours
8 hours
36 hours
24 hours
24 hours
Safety Grip Cold Cure 0°C
10°C
20°C
20 hours
12 hours
10 hours
12 hours
8 hours
6 hours
24 hours
16 hours
16 hours
48 hours
36 hours
24 hours
Safety Grip Flex 10°C
20°C
30°C
12 hours
8 hours
6 hours
10 hours
6 hours
3 hours
16 hours
12 hours
12 hours
24 hours
24 hours
24 hours

Full Chemical Resistance: 7 days

Light Traffic: Foot, trolley, pallet truck, occasional forklift

Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

Products You May Be Interested In remove

Grip Master, an attractive anti slip coating for heavy traffic areas, 5m² bucket Grip-Master 5 m²
grade
grade
grade
grade
(1)
Details
Safety Coat 5L, Anti Slip floor coating tin Watco Safety Coat Details
Watco Flexicoat 5L Details
Watco Concrex 10kg tub Watco Concrex Epoxy Repair Mortar
grade
grade
grade
grade
grade
(5)
Details
Concrex Fine Filler, quick and easy resin paste for filling small gaps, cracks and holes in concrete and masonry Concrex Fine Filler 1.5KG Details
Fine Crack Filler Details

Specifications add

Composition Safety Grip/Rapid/ Cold Cure: Anti slip, 100% solids epoxy resin. Safety Grip Flex: Anti slip, 100% solids polyurethane.
Number of Components 1 x curing agent, 1 x resin and 1 x anti slip particles.
Finish Heavily textured, glossy.
Primer Required Not usually. See ‘Priming’ section in 'How to Apply'.
Number of Coats 1
Usage Interior / Exterior Interior or exterior.
Application Tools Medium pile roller, cut in using a brush.
Min Application Temperature (°C) Air temperature 15°C, floor temperature 10°C (0°C for Cold Cure).
Suitable For Concrete, well bonded paint, most flat rigid metals and stone. Use Safety Grip Flex on wood or flexible metal and asphalt (must be 3 months old). The moisture content of concrete should be less than 75% RH.
Coverage 5m².
Mix Ratio Safety Grip/Cold Cure: Up to 30 mins at 20°C. Rapid: Up to 20 mins at 20°C. Flex: Up to 25 mins at 25°C.
Cleaning Tools It is not practical to clean applicators and they should be discarded after use.
Shelf Life 12 months in unopened containers.
Cleaning Normal industrial cleaners - Watco Protect is ideal. Do not steam clean.
Storage Between 15°C-25°C for at least 8 hours prior to use. Do not allow to freeze.
Principle Limitations Most self-levelling compounds cannot be painted – please ask for details. Unsuitable for new asphalt and galvanised surfaces. Painting chequer plate can be a problem since any coating will prematurely wear off the ‘high spots’ when subjected to regular traffic.

How to Apply add

SURFACE PREPARATION

Bare Concrete – remove surface laitance, dust and any light dirt or grease deposits using Watco Etch & Clean. Watco Etch & Clean also etches smooth, bare concrete surfaces to provide a key. Flush with clean water and allow the surface to dry. For the removal of heavier deposits of oil and grease we recommend Watco Concroff, again, flush with clean water and allow the surface to dry.

New Concrete – as a guide, new concrete should be left for 8 weeks to dry. The surface should then be prepared using Watco Etch & Clean, thoroughly rinsed and left to dry.

Priming – is not usually required, but for very porous high suction surfaces, such as sand and cement screed, use Watco 4 Hour Epoxy Primer. Concrete should be sufficiently porous to allow the paint to penetrate, so very smooth or power floated concrete is unsuitable unless first primed with Watco Powerfloat Primer.

Painted Surfaces – abrade to remove any weak or loose paint. Check remaining paint is well bonded. Very smooth, glossy paint should be lightly abraded to provide a key. Watco Bio D can be used to remove grease and oil from painted surfaces. Watco Concroff is a very powerful degreaser for contaminated bare concrete, (do not use on a previously painted surface since it can soften paint). A trial area is advisable to test compatibility with previous coatings.

Asphalt – new asphalt must be sound and at least 3 months old. If any residual oils remain, the surface should be washed using Watco Concroff. Painted asphalt should be cleaned with Watco Bio-D (Concroff can soften paint), and a trial area is advisable to test compatibility with previous coatings.

Metal – remove any rust and flaking material by disc grinding or wire brushing. Apply the coating immediately after preparation to the clean metal surface. Grease or oil can be removed using Watco Bio D. Allow the metal to dry before coating.

Galvanised Metal – Watco Galvaprime must be used to prepare galvanised metal.

Non-ferrous Metals – for advice, please contact our Technical Department.

MIXING & APPLICATION

  1. Individually stir the resin and curing agent using a Watco Paint Mixer, (or a wooden batten at least 25mm wide is ideal).
  2. Pour the mixed components into the larger outer tin and stir thoroughly until uniform in colour.
  3. Pour the mixed resin and curing agent into a shallow roller tray.
  4. Apply the mixed resin and curing agent by medium pile roller (not foam) to a measured area of 5m2. A paint brush may be used for cutting in around the edges.
  5. Immediately sprinkle the anti slip aggregate, uniformly, onto the wet coat to obtain the desired surface finish (total or light coverage).
  6. Using the same roller that was used to apply the mixed resin and curing agent, roll over the sprinkled aggregate to bed in. Do not re-charge the roller with mixed resin and curing agent unless very heavy quantities of grit have been applied, since this will result in a loss of slip resistance.
  7. Avoid washing the surface for 7 days after application In exceptional temperature conditions advice should be obtained from Watco’s Technical Department.

MAINTENANCE

Remove dirt with a medium stiff broom or light scrubbing machine using detergents if necessary – Watco Protect is ideal.

 

Accessories & Toolsadd

Associations, Awards & Standards

Best Industrial and Warehouse Supply Business 2016 - ECMOD AwardBCF customer service award 2016ISO 9001 Bureau Veritas CertificationNBS PlusBritish Coatings FederationFeRFA - The Resin Flooring Association

Legal Policy | Privacy Policy | Cookie Policy
© 2018 Watco Group, Registered in England - Number 459144. VAT number 413208691