Our cheapest anti slip epoxy resin floor paint
Watco Basics Anti Slip Epoxy Resin Floor Paint is a durable two-part paint suitable for medium to heavy use. It can be applied over existing well bonded paint, or onto bare concrete where it will penetrate the surface making it easier to keep clean. A separate unit of aggregate is supplied with Anti Slip Epoxy Resin Floor Paint, which is mixed into the paint to provide a finely textured slip resistant surface. Two roller applied coats will take heavy traffic including forklifts.
|Suitable for||Concrete, wood, existing well bonded paint|
|Finish||Mid gloss, fine texture|
|Interior or Exterior||Interior|
|Composition||2 part, water based epoxy resin|
|Number of components||3|
|Coverage||30m² per 5L per coat|
|Number of coats||2|
|Dry film thickness||100 microns|
|Curing time||24 hours at 20°C|
|Minimum application temperature||15°C|
|Storage||Avoid extreme temperatures.|
|Cleaning tools||Clean tools with water before the paint starts to dry.|
Clean and prepare bare concrete using Watco Basics Acid Etcher. This will remove light grease and oil deposits.
To remove heavier grease and oil use Watco Bio-D. This can also be used to remove grease from existing paint.
If over coating existing paint, please ensure it is well bonded. Remove any flaking or poorly bonded paint using a floor scraper for smaller areas or hire a grinder for larger areas. Smooth, glossy paint should be lightly abraded to provide a key.
Make sure the surface is clean and dust free before continuing.
New concrete should be at least 2 months old.
This paint is water-based, so it doesn’t matter if the floor remains slightly damp after cleaning.
Holes in excess of 5mm deep can be filled with Watco Basics Floor Repair Mortar, or providing the floor is level, Watco Pourable Repair Mortar.
For repairs which need to be ‘feather edged’ to nothing, or for repairs to damaged joint edges, please refer to Watco Concrex epoxy resin repair mortar. This should also be used if repairing broken kerb edges or step nosings.
Check the air temperature is around 15°C and the floor temperature at least 10°C.
Stir the contents of the resin and curing agent tins and then empty the content of the resin into the curing agent tin.
Mix the two components thoroughly using a wide bladed tool such as a piece of batten. A paint mixer in an electric drill is ideal.
If using the 5L anti slip version follow the above instructions, but empty the tin of aggregate into the larger, curing agent tin and mix this thoroughly. Then empty the contents into a mixing pail (a plastic bucket is ideal) and add the contents of the resin tin. Just use half the tin of aggregate if you are using the 2.5L size.
Mix thoroughly then tip the contents into a paint tray and apply using a medium pile roller. A brush can be used to cut in around edges.
Now it is mixed you have up to 2 hours to apply it before it become unusable.
Do not apply thickly.
Avoid applying in cold (below 15°C) conditions, instead see Watco Cold Set Coating.
Do not apply direct to dense, non-porous surfaces such as power floated concrete. This should first be coated with Watco Powerfloat Primer.
May cause rusting if applied to bare metal.
Unsuitable for outside application, (it will fade), instead use Watco Fastcoat.
Avoid using in confined spaces with little or no ventilation since it won’t dry. Choose Watco Epoxicote High Build for such areas.
£52.70 (Ex VAT)
Our Epoxy Floor Paint needs to be applied in two coats. It’s supplied as a tin of resin and a tin of curing agent. And when you mix the contents of the two tins together, it starts a reaction which causes the paint to cure.
If you’re painting an area of up to 15m², you’ll need two 2.5L tins (because, once mixed, a 5L tin won't keep for the second coat). Whereas, for an area of roughly 30m², you’ll need two 5L tins.
Here’s how we work it out:
Our Coverage Calculator works this out for you – that way you know you’re buying exactly the paint you need and can use, without any waste, at the lowest price – guaranteed.
Painting your floor isn't an easy task, so getting the right level of durability will increase the longevity of your floor. In choosing a hardwearing product, you won't need to revisit the project for years.Shop paint
Chemical resistance is important for areas that store or use chemicals. To protect the surface and increase its longevity, you’ll need a coating that stands strong against chemical spills.All chemical resistance
Conventional floor paints need to be applied above 10°c in order for them to cure. We’ve formulated products using the latest resin technology, so you can apply them temperatures down to -10°c.All cold cure
Take the stress out of painting your floor with our rapid curing products. You can clean, prepare and paint your floors in as little as just one day.All rapid