A brush applied solvent free line marking paint designed for use on asphalt, concrete and tarmac surfaces. Ideal for car parks and medium use areas.
.

Flexible acrylic formulation

High build one coat application

Brushes wash out easily with water

Can be applied to slightly damp
surfaces

Suitable for internal or external floors

Ideal for light to medium traffic

Easily applied by brush with one coat to give a flexible line unaffected by sunlight

Coverage approx. 200m of 50mm wide line per 5 litres depending on substrate. One coat is normally sufficient.

Surface Preparation
Watco Trafficline can be applied to asphalt, tarmac, porous concrete, masonry, bricks, breeze blocks and most metals. Ensure the surface is clean, sound and dry (slightly damp is acceptable). Watco Bio D is a solvent free degreaser which can be used on asphalt and similar surfaces. Watco Trafficline can be applied to existing paint providing all poorly bonded material is removed and glossy surfaces are dulled using abrasive.

Application
Apply Watco Trafficline by brush. Avoid applying too thickly. Do not apply externally if rain or frost are forecast or if the temperature is below 10°C. The second coat should be applied after approximately 1 hour.

In exceptional temperature conditions advice should be obtained from Watco’s Technical Department.