Close

Incoming Message

Watco UK

Protecting your premises since 1927

My Shopping Basket

(0 Items) £0.00

  • 01483 418 418
  • Live Help_
Search Site  Advanced Search
Also search in blog posts
  • Home /
  • Watco Tactile Plates

10% off for Spring 2012

Related Products

  • Skeleton Gun

    Skeleton Gun

    £4.20 Excl. VAT
    Details

My Cart

You have no items in your shopping cart.

Compare Products

You have no items to compare.



Unit Converter

Recently Viewed Products

  1. Watco Tack Coat
  2. Watco Tack Coat Damp Prime
  3. Watco Tack Coat Cold Cure
  4. Surface DPM
  5. Watco Surestep Walkway

Watco Tactile Plates - Corduroy Tactile

Watco Tactile Plates

Tough, GRP tiles to warn of a change in elevation or a hazard ahead

SKU# W090283

Be the first customer to give a product tip

Product Name Price Qty
Tactile Plates Corduroy, Buff 400X400
£30.50 Excl. VAT
  • Buy 4 for £26.30 each
Tactile Plates Onstreet, Buff 400X400
£29.00 Excl. VAT
  • Buy 4 for £25.00 each
GRP Polyurethane Adhesive 295ML
£18.90 Excl. VAT
Tactile Plates Onstreet, Tile Red 400X400
£29.00 Excl. VAT
  • Buy 4 for £25.00 each
Tactile Plates Offstreet, Buff 400X400
£29.00 Excl. VAT
  • Buy 4 for £25.00 each
Add Items to Cart
Description
  • The surface is coated with aluminium oxide grit for slip resistance and high wear resistance
  • Tiles are glued and screwed to the existing substrate to avoid costly excavation
  • Only 4mm thick.

    Three different styles are available:


    Warns visually impaired people of the presence of hazards such as stairs or level crossings. Available in Buff.



    Each tile has 36 blisters in regular rows and columns to indicate the edge of a footway near a crossing. Designed to help prevent the visually impaired from inadvertently walking onto a vehicular route. Available in Buff or Tile Red.


    The blisters on this tile run parallel in one direction, but are irregular in the other direction. They indicate movement in one direction is safe and are ideal for train or light rail platforms. Available in Buff.

    • Technical Specs
    Delivery Time (Days) standard
    Width (mm) 400
    Usage - Interior / Exterior exterior
    Usage - Properties

    tough, virtually indestructible, rot resistant, the surface is coated with aluminium oxide grit for slip resistance and wear resistance, tiles are glued with Watco Adhesive Mastic and screwed to the existing substrate to avoid costly excav
    Usage - Surfaces floor
    Max Operational Temp (deg C) 60
    PREPARATION & APPLICATION
    Correct Use

    Use Tile Red Tactile Plate for Controlled crossings, i.e.
  • zebras
  • pelicans
  • puffins
  • toucans
  • traffic signal junctions with pedestrian phases

    Use Buff Tactile Plate for Uncontrolled crossings, i.e.

  • side road crossings
  • busy crossovers (vehicle crossings)
  • crossings away from junctions
  • kerb to kerb flat top road humps
  • signal controlled junctions without pedestrian phases (traffic lights), including those where studs indicating a pedestrian crossing place are provided

    Fixing

    Watco Tactile Plates can be glued or screw fixed to the substrate. If the substrate is reasonably smooth and even, Watco GRP Polyurethane Adhesive can be used. The substrate should be clean and dry. A mechanical fixing is not generally required. If the substrate is uneven, Watco Adhesive Mastic can be used as a gap filling adhesive. When using Watco Adhesive Mastic we recommended that a screw fixing is made in each corner of each tile. The plate is easily drilled and any type of screw and Rawlplug fixing can be used which best suits the substrate. Watco Adhesive Mastic and screw fixings are recommended if the substrate is damp, very cold, contaminated or in generally poor condition.

    • Quick Overview

    Tough, GRP tiles to warn of a change in elevation or a hazard ahead
    • Products and Solutions
    • Resource Centre
    • Watco UK
     
    © 2011 Watco Group. All Rights Reserved.

    Watco UK Ltd, Watco House, Filmer Grove, Godalming, Surrey GU7 3AL