An epoxy adhesive primer, for use before screeding with Watco Concrex Cold Set between 0°C - 10°C.

Suitable for internal or external applications

Quick and easy to mix and apply

Concrex Cold Set can be applied in approx. 1 hour at 0°C or 45 minutes at °C

Can be applied over existing paint, but all poorly bonded paint must be removed and well bonded paint roughened to provide a key

Available in 1m² or 6m² packs

Watco Tack Coat is an epoxy resin adhesive primer for use before screeding with Watco Concrex Cold Set.

Application Video

Surface Preparation

---

Mixing
Pour the contents of the smaller tin into the larger tin and mix thoroughly with a wide bladed tool. When using the 6m² pack decant into a shallow tray. Do not leave mixed components in the tin - the product will quickly become unusable and the tin become hot. Use immediately, the pot life of the mixed components is 20 minutes maximum at 20ºC, less at higher temperatures.

Application
Apply sparingly by roller or brush and allow to become ‘tacky’. Overlaying must be completed while the Watco Tack Coat Cold Cure is still tacky. This product should be applied with temperatures of 0ºC - 10ºC.