Close

Incoming Message

Watco UK

Protecting your premises since 1927

My Shopping Basket

(0 Items) £0.00

  • 01483 418 418
  • Live Help_

10% off for Spring 2012

Watco Sprayline Plus

Watco Sprayline Plus

Industrial grade aerosol paint system

SKU# W090281

Product Name Price Qty
Sprayline Plus APPLICATOR 4 WHEEL
£122.20 Excl. VAT
Sprayline Plus Applicator 1 WHEEL
£26.30 Excl. VAT
Sprayline Plus YELLOW
£18.80 Excl. VAT
  • Buy 4 for £17.40 each
  • Buy 12 for £15.40 each
  • Buy 36 for £13.10 each
Sprayline Plus WHITE
£18.80 Excl. VAT
  • Buy 4 for £17.40 each
  • Buy 12 for £15.40 each
  • Buy 36 for £13.10 each
Sprayline Plus RED
£18.80 Excl. VAT
  • Buy 4 for £17.40 each
  • Buy 12 for £15.40 each
  • Buy 36 for £13.10 each
Sprayline Plus BLUE
£18.80 Excl. VAT
  • Buy 4 for £17.40 each
  • Buy 12 for £15.40 each
  • Buy 36 for £13.10 each
Add Items to Cart
Description
Uses: Definition of key areas on factory floors, car parking spaces etc.
The Watco Sprayline Plus system is designed for fast, easy linemarking in general industrial and medium wear environments.

  • Fast, accurate application
  • Touch dry in 15 – 20 minutes and fully cured in 24 hours
  • Highly visible, durable and weather resistant
  • Suitable for exterior and interior use

    Watco Sprayline Plus is an easily applied industrial grade aerosol paint designed to produce an accurate, clean line quickly when used with a Watco Sprayline Plus Applicator.

    Coverage approx. 80m of 50mm wide line per 591ml aerosol.
  • Technical Specs
    Delivery Time (Days) standard
    Usage - Interior / Exterior interior or exterior
    Usage - Properties industrial grade aerosol paint system, fast and accurate application, highly visible, durable, weather resistant, easy to apply
    Usage - Surfaces floor
    Max Operational Temp (deg C) 60
    Application - Drying time (hours) 0.15 - 0.2
    Application - Recommended Coats 1
    PREPARATION & APPLICATION
    Surface Preparation
    Ensure the area to be sprayed is clean, dry, and free of loose material. Although Watco Sprayline Plus is suitable for most surfaces we recommend a small area is tested first to ensure compatibility with the existing surface.


    Application

    1. Shake can vigorously for at least 1 minute prior to use.
    2. Remove cap, turn can upside down and place into holder of Sprayline Plus Applicator. Ensure spray head is fitted securely into hole (The long side of the spray head must be parallel with the Applicator axle).
    3. Adjust the height of the can using bolts on each side of the Applicator. As a guide with the can in the lowest position the line will be 50mm wide. The highest position gives a 100mm line. Intermediate widths can be obtained by adjusting the height of the can between these two points.
    4. To apply a line gently squeeze the trigger on the Applicator. To avoid a “build up” of paint at one point make sure the Applicator is in motion and over the start point of the line prior to activating the trigger.
    5. Should the spray pattern deteriorate after prolonged use, remove the spray head and clean out the holes in the nozzle with a pin or similar. Immediately after using the product hold can upright, point away from yourself and press the spray head briefly to “blow out” any paint remaining in the valve.
    6. Watco Sprayline Plus is touch dry after a few minutes and fully hardens in 12 – 24 hours depending upon site and temperature conditions.

    Quick Overview

    Industrial grade aerosol paint system

    Other people also bought the following product(s)


    Watco UK Ltd, Watco House, Filmer Grove, Godalming, Surrey GU7 3AL