Gives better adhesion on poor surfaces. Apply just one coat by brush and allow to dry (for about one hour) before applying Watco Surestep range or Safety Tapes (not recommended for use with barefoot grade).

A 500ml unit of primer is sufficient for the following:

2 of Watco Safety Tape 18m x 50mm Rolls, (including Conformable, Coloured, Hazard and Photoluminescent Tape)

1 of Watco Safety Tape Wide 18m x 100mm and 18m x 150mm. (2 units required for 18m x 300mm size)

20 of Watco Surestep Treads 610mm x 150mm (including Conformable, Caution, Clear and Reflective Treads)

80 of Watco Surestep Tiles 140mm x 140mm

1 of Watco Surestep Roll 18m x 300mm. 2 units of primer are required for the 9.1 x 610mm and 4.5 x 1m sizes. 3 units are required for the 9.1m x 1m and 18m x 500mm sizes

1 of Watco Surestep Hazard 9.1m x 300mm. 2 units of primer are required for the 9.1m x 508mm size

2 of Watco Surestep Sheet 1m x 1m


Coverage approximately 2 – 3m² per 500ml.