Quick drying primer: touch dry in 30 minutes

Overcoatable in 2 hours (at 20°C)

Hard dry in 2 hours

Suitable for both interior and exterior surfaces

Helps prevent further corrosion and rusting

Coverage approx. 40m² per 5 litre pack.

Surface Preparation
Abrade and clean the surface thoroughly to remove all scale, rust, old paint and contaminants. Degrease the surface if necessary.

Application

Stir primer thoroughly before use. Apply one or two coats as required using a short pile roller or paint brush. It can be used before applying Watco Nanosystem Cladding Paint or may be used as a general purpose metal primer.