Watco Industrial Wall Coating provides superb hiding power with just one application. Specially formulated for industrial and commercial premises, it covers normally in one thick coat to provide, in half the time, a bright clean appearance to walls and ceilings.

• Covers in one coat
• High build, non drip formulation
• Fast drying and easy to apply
• Can be spray applied

The special high build, non-drip formulation eases application.

Coverage approx. 50m² per 10 litres. Only a single coat is required.

Surface preparation
A minimum of surface preparation is necessary, but contaminants and any loose material should be removed. Surfaces which are loose and friable or very porous should be primed with a 50% dilution of Industrial Wall Coating with water.

Application
Watco Industrial Wall Coating is best applied in one thick coat with a 5” brush. A paint roller may be used, but as it applies more sparingly, a second application may be necessary. To spray or in exceptional temperature conditions, advice should be obtained from Watco’s Technical Department.