Uses: ideal for filling voids and cracks or providing a reliable fixing for bolts, railings, posts etc.

Excellent resistance to dilute acids, alkalis, oils and petrol

Tensile strength >30 MPa at 20°C, Compressive strength >60 MPa at 20°C

The outstanding adhesion and strength properties of this 100% solids epoxy resin will hold machinery fixings and sole-plates permanently in place. The product can be used to anchor machinery which vibrates in use.

Coverage approx. 2kg makes 1 litre, enough to fill at least 30 holes at 25mm diameter x 50mm deep (0.001m³).

Preparation

Holes should be clean and sound. Avoid drilling out using a diamond drill since this leaves a very smooth finish. Surfaces should be dry. The product will be less successful in shallow holes with sloping sides.


Mixing
Remove the tin of curing agent from the bucket. Mix the loose sand and resin together in the bucket using a flat bladed palette knife or similar. Add the curing agent and mix thoroughly until uniform. Use immediately, the mixed components quickly become warm and have a lifetime of approximately 15 minutes at 20°C.

Application
Pour into the prepared hole. If inserting bolts etc, do so with a twisting action to prevent air pockets. Supports may be required until the product has hardened.