Close

Incoming Message

Watco UK

Protecting your premises since 1927

My Shopping Basket

(0 Items) £0.00

  • 01483 418 418
  • Live Help_
Search Site  Advanced Search
Also search in blog posts

10% off for Spring 2012

Related Products

  • Skeleton Gun

    Skeleton Gun

    £4.20 Excl. VAT
    Details

My Cart

You have no items in your shopping cart.

Compare Products (3)

  1. Remove This Item Watco Wallseal
  2. Remove This Item Watco Industrial Wall Coating
  3. Remove This Item Fireguard WHITE 5L
Clear All


Unit Converter

Recently Viewed Products

  1. Watco Fast Curing Epoxy Coating
  2. Fibreglass Reinforcing Tape
  3. Watco Flashing Bandage
  4. Watco Fire Action Signs
  5. Watco Flexi-Mat

Watco Flexible Crack Sealant

Flexible Crack Sealant

An easy to use cartridge based flexible crack filler

SKU# FXCF310

Be the first customer to give a product tip

310ml From £14.70 Excl. VAT
  • Buy 1 for £14.70 Excl. VAT each
  • Buy 6 for £12.50 Excl. VAT each and save 15 %
  • Buy 12 for £11.00 Excl. VAT each and save 25 %
Add Items to Cart
Description
Uses: fill and seal joints or cracks approximately 3 – 25mm wide in concrete floors. Adheres to metal, enamel, wood, GRP and plastics.
  • Easy to apply with a standard skeleton gun
  • Flexible, moves with substrate (±25%)
  • Hard wearing
  • Excellent adhesion with no primer needed
  • Suitable for vertical and horizontal repairs
  • Good slump resistance
  • Rapid cure – tack free in under 4 hours
  • Can be overpainted
  • Good chemical resistance Watco Flexible Crack Sealant can be overpainted after 24 hours, but any future movement of the substrate could cause a hairline crack to appear in the paint. Our most appropriate coating for floors liable to slight movement is Watco Flexicoat. Coverage approx. 9m of crack, 6mm wide, 6mm deep per 310ml cartridge.
    • Technical Specs
    Delivery Time (Days) standard
    Primer Required no
    Usage - Interior / Exterior interior or exterior
    Usage - Properties ideal to fill cracks approximately 3-25mm wide in concrete floors, easy to apply with a standard skeleton gun, flexible moves with the substrate (+/- 25%), hardwearing, excellent adhesion with no primer needed, good slump resistance, rapid cure, can be ov
    Usage - Surfaces floor, wall
    Max Operational Temp (deg C) 60
    Coverage (m² per litre) 0.029 at 6mm wide x 6mm deep
    Application - Drying time (hours) 4
    PREPARATION & APPLICATION
    Surface Preparation
    Joints and cracks should be clean, dry, sound and free from grease and any other substances likely to impair adhesion .


    Application
    Temperatures should be between 5ºC and 40ºC.

    1. Pierce the foil membrane at the top of the cartridge and screw on the plastic nozzle.
    2. Cut the cartridge nozzle to the desired size to match the width of the joint or crack.
    3. Lift tab at the base of the cartridge and pull out metal cover.
    4. Place in a conventional skeleton gun and apply.
    5. After application press sealant down with an appropriate tool to ensure full firm contact.

    Quick Overview

    An easy to use cartridge based flexible crack filler

    Other people also bought the following product(s)

    • Products and Solutions
    • Resource Centre
    • Watco UK
     
    © 2011 Watco Group. All Rights Reserved.

    Watco UK Ltd, Watco House, Filmer Grove, Godalming, Surrey GU7 3AL