50% off High Vis Yellow. The discount will be applied at the checkout.
Uses: ideal for heavily trafficked areas, areas subject to chemical spillage.

Watco Epoxyline is a brush applied, epoxy resin, heavy duty line marking paint with excellent resistance to abrasion and harsh chemicals.

Can be applied to bare concrete or well bonded paint

Touch dry overnight. Full chemical resistance in 5 days

Solvent free and virtually odourless

Not recommended for exterior use, instead we recommend Watco Trafficline.

Coverage approx. 50m of 50mm wide line per litre (2.5m²). One coat is normally sufficient if you're applying by brush.

Surface Preparation
All surfaces should be clean and dry before application. On painted or sealed surfaces remove any poorly bonded material and abrade well bonded paint or sealer to provide a key. A trial area is recommended on smooth, shiny surfaces to test adhesion. Edges of lines should be defined with masking tape.



Mixing
Thoroughly stir the contents of the smaller resin tin before emptying it into the larger curing agent tin. It is very important that all the contents of the resin tin are decanted and thoroughly mixed with the curing agent with a wide bladed tool until an even colour is obtained.

Application
Best results are achieved in warm (minimum 15°C), dry conditions with good air circulation. In very high temperatures (30°C and above) it is recommended that bare concrete is lightly dampened first with water. Ideally use a brush and apply sufficient paint to obliterate the substrate. Do not over brush. Remove masking tape 1 to 2 hours after painting.