A single pack, clear liquid coating for stained or unstained decking and other timber substrates subject to light to medium pedestrian traffic.

• Fine texture improves the slip resistance of exterior timber decking
• Easy to apply with a short pile roller or brush
• Touch dry in 2–4 hours
• Ready for traffic in 12–16 hours
• Can be re-coated after 8 hours
• Glossy, clear, finely textured finish

Coverage approx. 20m² per 2.5 litres.

Pendulum Slip Test Values
Dry PTV	Wet PTV
73 Extremely low slip potential	68 Extremely low slip potential

Surface Preparation
Surfaces to be treated should be clean, dry and free from mould or any other surface contaminant likely to cause adhesion problems, such as wax, grease, oil etc.

Application

Stir thoroughly with a broad stirrer before use. A short pile roller is recommended but a brush may be used for small areas. Apply two full coats.