Floors
The floor must be dry before application. Brush in undiluted Watco Concroff Super Safe with a stiff broom, allowing at least 15 minutes for penetration. A little water may be added to the floor at this stage to aid spreading. Too much will reduce the effectiveness of Watco Concroff Super Safe. Then loosen deposits with a stiff broom or mechanical scrubber. Rinse with clean cold water preferably whilst continuing to scrub. If further applications are required, the floor should be reasonably dry before application.
Machinery, vehicle engines and chassis

Liberally coat oily and greasy parts using a soft brush or spray and brush well in. Leave for 5 – 15 minutes according to hardness of oil or grease. Rinse well with clean cold water. Protect any material that might be attacked or must not become wet.