Watco Concrete Sealer is a moisture curing polyurethane solution with excellent chemical and abrasion resistance.

Provides a tough, scratch resistant, clear glossy finish

Chemical and abrasion resistant, ideal for heavy wear environments

Can be used in factories, warehouses, workshops, garages etc

Will tolerate regular use by forklift trucks

Watco Concrete Sealer gives an attractive smooth lacquer finish to bare concrete and similar surfaces. It can also be applied to existing sealed or painted surfaces (we can provide a test sample to check compatibility.
A single pack moisture curing polyurethane solution with excellent chemical and abrasion resistance, ideal for concrete floors and sand/cement screeds.

For a slip resistant alternative, please see Watco Clear Anti Slip Coating.

Coverage approx. 40 - 45m² per 5 litre pack per coat.

Surface Preparation
All surfaces to be treated should be clean, sound, dry and free from all dust, dirt and general surface contamination. All oils, grease and grime should be completely removed. Any laitance should be removed by blasting, disc grinding or other suitable mechanical methods. Substrate should be as dry as possible for coating (less than 10 on the protimeter concrete moisture scale for porous surfaces). Existing coatings must be sound, firmly adhered, thoroughly abraded and compatible with Watco Concrete Sealer. We recommend a trial is carried out on existing coatings to ensure compatibility. Loose and flaking material must be removed and feathered off to a firm edge.


Application

Apply between 10°C and 30°C. Watco Concrete Sealer can be applied with a brush or short pile roller. Two coats are recommended for an even finish. The first coat should be thinned by approximately 20% with Watco Cleaning Solvent ‘TH99’ if the substrate is particularly porous or friable.