Close

Incoming Message

Watco UK

Protecting your premises since 1927

My Shopping Basket

(0 Items) £0.00

  • 01483 418 418
  • Live Help_

10% off for Spring 2012

Block Paving Sealer

A clear coating to enhance the appearance of block paving and retain sand in the joints for a stronger pavement

SKU# BPS5

5L From £44.10 Excl. VAT
  • Buy 1 for £44.10 Excl. VAT each
Add Items to Cart
Description
Watco Block Paving Sealer is a quick drying resin that gives a slight sheen to block paving. It enhances the colour and helps to prevent staining. Like Watco Block Paving Stabiliser, it also binds the jointing sand grains to one another and to the sides of pavers, which strengthens the paving.

  • Easy to apply with a brush or roller
  • Tough, abrasive resistant surface
  • Dries in approximately 4 hours (at 20°C)
  • Reduces surface porosity and resists staining by oil, petrol, etc.
  • Strengthens pavements by holding the sand in joint
  • Helps to prevent weeds growing between paving joints

    Watco Block Paving Sealer is based on a semi-gloss, clear resin in a moisture curing polyurethane solution to give a tough, abrasive resistant surface.

    Coverage approx. 15m² per coat per 5 litre pack, depending on the porosity of the pavers, block size and joint width. One coat is usually sufficient.
  • Technical Specs
    Delivery Time (Days) standard
    Primer Required no
    Usage - Interior / Exterior exterior
    Usage - Properties easy to apply, tough, helps prevent weeds growing between the paving slabs, enhances the appearance of black paving, retain sand within the joints, quick drying, semi-gloss finish, enhances the colour, helps prevent staining
    Usage - Surfaces floor
    Max Operational Temp (deg C) 60
    Coverage (m² per litre) 3
    Application - Drying time (hours) 4 at 20 degrees
    Application - Recommended Coats 1
    PREPARATION & APPLICATION
    Surface Preparation
    All surfaces to be treated should be clean, dry, sound and free from dirt, dust and other contaminants. If the paving has been washed, it must be allowed to dry thoroughly before treatment with Watco Block Paving Sealer. Treat any areas of moss or fungal attack with a suitable algicide/ fungicide. Joints should be filled or topped up to the bottom of the chamfer with clean, dry compacted sand of the correct specification.


    Application
    Apply in temperatures above 10°C and when rain is not expected for at least 24 hours. Take a working quantity from the tin and re-seal immediately to prevent moisture vapour contamination in the can. Apply Watco Block Paving Sealer by brush or roller, taking care not to apply it too thickly. Do not allow excess product to build up in the sand joints. Do not allow the product to pond on the surface. One coat is usually sufficient. Two coats may be applied but will leave a glossier finish. If two coats are required apply the second within 4 to 48 hours of the first to ensure good intercoat adhesion.

    Warning Watco Block Paving Sealer must not be allowed to flow down drains, storm drains or enter open water courses.

    Quick Overview

    A clear coating to enhance the appearance of block paving and retain sand in the joints for a stronger pavement

    Other people also bought the following product(s)


    Watco UK Ltd, Watco House, Filmer Grove, Godalming, Surrey GU7 3AL