Uses: formulated to remove oil and grease from masonry and concrete floors where sensitivity to solvent odours from traditional degreasants may be a problem.

Ideal for preparation prior to repair or painting

Virtually solvent free and biodegradable

Simply rinse away or mop up with absorbent granules

Perfect for confined or odour sensitive areas.

Eliminates the need for a second stage cleaner.
Surfaces cleaned with solvent based degreasants generally require the use of a second stage cleaner to remove residues prior to painting. Surfaces washed with Watco
Bio D and then rinsed with water are left ready for painting.
May be diluted with water for removal of light to medium contamination. Safe for use on most painted surfaces.

Coverage approx. 20m² per 5 litres.

Application: Floors
Apply undiluted Watco Bio D with a stiff broom to the surface and leave for 5-10 minutes for penetration. Then scrub with a stiff broom or mechanical scrubber. Rinsing with clean cold water will float away oil and grease.

Application: Machinery
Liberally coat oily and greasy parts using a soft brush. Leave for 5 -15 minutes according to hardness of oil or grease, then rinse well with water. Protect materials that might be damaged or must not become wet.

Warning: Watco Bio D is biodegradable, but a mixture of Bio D, oil and grease should not be allowed to enter rainwater drains or open water courses. The mixture can be removed from the floor using a wet vacuum and disposed of as chemical waste.