SPECIAL OFFER: 50% off - Limited stock available. The discounted price will show when the product has been added to your basket

Uses: steps, walkways, floors and swimming pool and shower areas.

A convenient medium term solution for areas that are slippery when wet. It can be used for all types of pedestrian traffic, including bare feet. Can be used on tiles, concrete, metal, wood, ceramics and many other surfaces.
Gives a finely textured, slip resistant satin finish.
Available in clear, yellow or black.The dried film of the clear version may appear slightly grey or yellow on certain coloured backgrounds. Please test before use on decorative surfaces.

Coverage approx.
Clear version - 1.5m² per 450ml unit.
Coloured version - 2m² per 500ml unit.

Watco also manufactures a comprehensive range of durable anti-slip coatings for heavy wear areas.

Pendulum Slip Test Values
Dry PTV	Wet PTV
59 Low slip potential	52 Low slip potential

Surface Preparation
Surfaces must be clean, dry and above 5OC. Remove any wax or polish. Smooth painted surfaces should be lightly abraded to provide a key before applying the coloured version.


Application

The product contains solvent so please use only in well ventilated areas. Shake the aerosol for at least one minute before and frequently during use. Hold aerosol approximately 15cm from the surface and spray in light even strokes. Ensure that the can is in motion when spray nozzle is pressed to avoid sags and runs. A build up of several thin coats produces a better finish than one thick coat. After use invert the can and press the spray nozzle for a few seconds to clear the valve.

The surface may require periodic reapplication depending on the level of pedestrian traffic. Repeated applications may lead to a build-up which could become brittle or unsightly. If required this build-up can be removed before applying more Watco Anti Slip Spray. Wash residues of this product away with water and allow the surface to fully dry before applying more Watco Anti Slip Spray.