Watco Tyre Mark Remover is effective with all types of tyre marks, including those from fork lift trucks. It is also effective against a wide range of dirty or oily marks on floors and other surfaces.

Easy to use – minimal rubbing or abrasion is usually needed

Designed to minimise any effect on the floor surface itself, including most painted surfaces

Formulated as a micro emulsion containing citrus based oils

Apply neat to the affected surface. Allow to soak in for a few minutes then remove with a dry absorbent cloth.

Application
Shake the bottle and apply Watco Tyre Mark Remover undiluted to the affected surface. Leave it for a few minutes then remove the solution with a dry absorbent cloth. A heavy build up or old residue may require repeated applications. Stubborn deposits may require light abrasion. It is recommended to use the least abrasive technique available to avoid marking the floor surface, for example using a non-scratch washing up pad or a fine nylon scrubber. In all cases we recommend a trial on painted surfaces to ensure that the surface will not be damaged by the Tyre Mark Remover or the cleaning action.
Some tyre marks become an integral part of a painted surface, or become chemically bonded to the paint. Such marks cannot be removed without damage to the surface. Remove residues of tyre mark remover with a dry cloth or with warm water. The residue should be rinsed away and completely dry if the floor is to be painted.