- Product Details
Part of the new Decorative Range, Watco Stellar Flake System combines a highly attractive appearance with heavy duty durability. A blend of coloured PVA flake is bound into two coats of polyaspartic resin. The resulting gloss finish reflects light and will transform an ordinary floor into something special. Ideal for use in showrooms, retail and display areas, foyers, rest rooms, waiting rooms, wash rooms or anywhere that appearance is important.
- Decorative, light reflective finish
- Ultra-tough and easy to clean
- Transforms any work or recreational areas
- Easy to apply by roller
- Resistant to commonly used chemicals and staining from tea or coffee spillages
- Available in 4 nature inspired colours: Dolomite, Flint, Glacier, or Granite
- Can be applied at temperatures as low as -10°C
- Free tile samples are available on request
- Coverage approx 10m² per 2.5L pack when applied by roller
Quick LinksTechnical Data Sheet
- Specifications + Technical Data Sheets
Usage - Interior / Exterior interior and exterior Usage - Suitable for retail areas, commercial areas, showrooms, restrooms, reception areas, production areas Usage - Properties durable, decorative two part polyaspartic formulation. Fast curing, chemical and slip resistant Usage - Surfaces concrete, stone, painted surfaces, sand and cement, screed, asphalt, metal, wood, vinyl Application - Curing Time (hours) Ready for foot and light traffic after 6-8 hours and heavy traffic after 12-16 hours, based on a temperature of 15-20°C. Application - Pot Time (hours) Once mixed the components can be used for up to 20 minutes at around 20°C.
- How To Apply
Concrete Concrete to be treated must be at least four weeks old, completely dry and free of surface laitance (a weak dusty layer on concrete), contaminants and any previous poorly bonded coatings. All traces of grease or oil should be removed with Watco Bio D (or a similar emulsifying degreasant) and the area thoroughly washed off and allowed to dry. Very smooth concrete or concrete with surface laitance should be etched with Watco Etch and Clean to ensure adequate adhesion. Etch & Clean also effectively removes dirt and light oil deposits. The concrete should be thoroughly washed down and allowed to dry after treatment with Watco Etch & Clean. Watco Powerfloat Primer is available for highly polished or powerfloated surfaces.
Painted Surfaces Previously painted surfaces should be thoroughly abraded by sanding to improve adhesion and to remove any weak or loose material. A trial area is advisable to test compatibility with previous coatings.
Sand and Cement screed Avoid washing since this surface will absorb water. Remove dirt by sweeping and vacuuming if necessary. Apply one coat of Watco 4 Hour Epoxy Primer to reduce absorbency.
Metal Surfaces should be clean and dry. Galvanised surfaces should first be treated with Watco Galvaprime.
Wood Sand to remove any surface contamination.
Asphalt Asphalt/Tarmac surfaces should be at least 3 months old. Remove any grease and oil using Watco Bio D . Flush with water and allow to dry.
Remove the two inner tins from the tall outer tin. Stir the contents of each tin thoroughly and pour all of the contents into the outer tin (scrape around the inside of the tins to remove any residue). Mix the components together thoroughly using a spatula or similar wide bladed tool (a piece of wooden batten is ideal). Continue mixing until an even colour and consistency are obtained. Do not mix more than one pack at a time. If a paint stirrer fitted to an electric drill is used, also use the spatula to blend in any unmixed material from the sides and bottom of the tin.
Pour the mixed components into a paint scuttle and apply to the floor using a medium pile roller. Use a paint brush around the edges. Alternatively the mixed components can be poured directly onto the floor and distributed using a squeegee. Immediately finish using a roller. Immediately scatter the flake blend onto the Base Coat, ensuring that the Base Coat is entirely covered. Leave 4 hours to dry then then thoroughly sweep to remove excess flake. After the initial sweep, push a floor scraper blade across the floor at a 45° angle. This will knock off any sharp flake edges which have not laid flat. Sweep again to remove any residue of flake. A vacuum may make removing the residue easier. The surface is now ready to receive the Top Coat. Mix as described above for the Base Coat. Once mixed, the components can be used for 20 minutes at around 20°C.
- Request a Quote/Sample
Watco offer a range of delivery options to ensure you receive your order when you need it.
Choose standard, next day or Saturday morning delivery:
Delivery Charges Standard delivery for orders over £751 Free Standard delivery for order values up to £750 £6.25 - £26.00 depending on order value Next day delivery £13.75 - £33.50 depending on order value
For details of delivery costs for express or fixed time deliveriess please go through the checkout or call us on 01483 418 418.