Fine filler for repairing blemishes and bolt holes in concrete prior to painting
| Quantity | Price per item | Discount |
|---|---|---|
| 1+ | £56.75 | - |
| 6+ | £51.15 | Save 10% |
| Bulk discounts applied in basket | ||
Total price
£172.50 (Ex VAT)
When you paint a concrete floor the paint highlights chips or scratches in the surface, especially if the paint is glossy. Imperfections will be highlighted which probably weren't noticeable before and the finished result can be disappointing. Spending just an hour smearing Watco Concrex Fine Filler over these imperfections will leave a smooth surface ready for painting. It is quick and easy to use, with no odour, and is extremely strong once cured.
The finished repair can be painted with any Watco coating or it can be left as a wearing surface. Watco Concrex® Fine Filler is economical to use as you mix only as much as you need. It is virtually solvent free and will not shrink as it cures. No primer is necessary and it can be used for repairs with a very fine edge (feather edging).
For repairs deeper than 5mm we recommend you use Watco Concrex® Carbon Fibre.
| Properties | Ideal for repairing scratches and blemishes in floors or vertical surfaces, easy to mix 50:50 ratio by weight or by volume, will withstand very heavy traffic, resistant to most chemicals |
| Suitable for | Concrete, sand & cement and metal |
| Finish | Smooth, impervious surface |
| Interior or Exterior | Exterior, Interior |
| Primer required | No primer required |
| Composition | A two-part epoxy resin paste |
| Number of components | 1 x resin, 1 x curing agent, gloves, spreader, 2 x spatulas |
| Coverage | A 1.5kg twin pack makes approximately 1L of filler |
| Application tools | Spreader, spatula, gloves - supplied |
| Application | Smooth the mixed components over the repair |
| Curing time (at 20°C) | 3 hours |
| Minimum application temperature | 5°C |
| Maximum operational temperature | 60°C |
| Pot life | 10 - 15 minutes at 20°C, 20 - 3 minutes at 10°C |
| Storage | Between 10°C - 30°C. Do not allow to freeze |
| Shelf life | 12 months in unopened container |
| Principle limitations | Food products must be removed from the area during application and cure |
| Cleaning tools | The plastic scraper provided for applying should be wiped clean with white spirit or a similar solvent before the Concrex Fine Filler cures |
Surfaces should be clean and free from dust, oil, grease or other contaminants. Surfaces should be sound and not friable. Any exposed steel reinforcement should be cleaned to bright metal. Some surface dampness can be tolerated, but surfaces should not be wet.
Wearing the gloves provided in the pack and using the spatulas provided, take equal sized portions of the resin (off white), and curing agent (black), and mix them together thoroughly on a suitable mixing board until they are a uniform grey colour. The ideal mixing ratio is 1:1 by weight or volume – you should try to estimate equal quantities accurately, but there is no need to weigh or measure them. Do not mix at one time more than can be applied in 15-20 minutes.
Using the plastic scraper provided, press the mixed components into the repair and smooth off the surface. Any spillages should be scraped away or wiped off with a dry cloth, and can be cleaned with white spirit. The finished repair may be filled, sawn or drilled – take care not to inhale the dust from these operations. Finished, hardened repairs may be over painted after 1-2 hours.
£56.75 (Ex VAT)
In stock
| Quantity | Price per item | Discount |
|---|---|---|
| 1+ | £56.75 | - |
| 6+ | £51.15 | Save 10% |
| Bulk discounts applied in basket | ||
For super strength long lasting repairs to concrete floors, ramps & steps
From £115.75 (Ex VAT)
